DP-125 GRAY 1.7 FL OZ 3M, DP-125 GRAY 1.7 FL OZ Datasheet - Page 3

• Manufacturer Part Number: DP-125 GRAY 1.7 FL OZ
• Description: EPOXY 2 PART ADH DUAL CART 1.7FL.OZ
• Manufacturer: 3M
• Series: Scotch Weldr

Specifications of DP-125 GRAY 1.7 FL OZ

• Adhesive Type: Epoxy - 2 Part
• Adhesive Applications: Bonding - General Purpose
• Color: Gray
• Dispensing Method: Dual-Cartridge
• Volume: 1.7fl.oz. (US)
• Pack Quantity: 2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

3M
Epoxy Adhesives
DP125 Translucent and Gray
Typical Adhesive
Performance
Characteristics
Footnotes:
12. Overlap shear (OLS) strengths
were measured on 1 in. wide 1/2
in. overlap specimens. These
bonds were made individually
using 1 in. x 4 in. pieces of
substrate. The thickness of the
bond line was 0.005-0.008 in. All
strengths were measured at 70°F
except were noted. (Test per ASTM
D 1002-72.)
The separation rate of the testing
jaws was 0.1 in. per minute for
metals, 2 in. per minute for plastics
and 20 in. per minute for rubbers.
The thickness of the substrates
were: steel, 0.060 in.; other metals,
0.05-0.064 in.; rubber, 0.125 in.;
plastics, 0.125 in.
™
Scotch-Weld
Overlap Shear Strength (OLS) to
(Bonds cured 24 hrs @ RT + 2 hrs 160°F)
The following product performance data was obtained in the 3M laboratory under the
conditions specified. The following data show typical results obtained with the 3M™
Scotch-Weld™ Adhesives when applied to properly prepared substrates, cured, and
tested according to the specifications indicated. The data was generated using the 3M™
EPX™ Applicator System equipped with an EPX applicator static mixer, according to
manufacturer’s directions. Thorough hand mixing should afford comparable results.
Note: The following technical information and data should be considered representative
Rate of Strength Buildup
(OLS on Etched Aluminum)
Bonds tested after:
Environmental Aging
(OLS on Etched Aluminum)
Bonds tested after:
Etched Aluminum
Sanded Aluminum (60 grit)
Cold Rolled Steel
Wood, Fir
Glass, Borosilicate
Glass,
Polycarbonate
Acrylic
Fiberglass
ABS
PVC
Polypropylene
3 hrs @ RT
6 hrs @ RT
1 day @ RT
1 wk @ RT
1 mo @ RT
`
24 hrs RT + 2 hrs @ 160°F
24 hrs RT + 2 hrs @ 240°F
1 wk RT + 1 wk @ 90°F/90% RH
1 wk RT + 1 wk 248°F
1 wk RT + 1 wk H
™
or typical only and should not be used for specification purposes.
+3M™ Scotch-Weld™ Primer 3901
2
O Immersion
- 3 -
12
12
12
3M™ Scotch-Weld™
DP125 Translucent
DP125 Translucent
DP125 Translucent
Epoxy Adhesive
Epoxy Adhesive
Epoxy Adhesive
Scotch-Weld
Scotch-Weld
1300 psi
1900 psi
2050 psi
2300 psi
3300 psi
2600 psi
4600 psi
2100 psi
2500 psi
1400 psi
1500 psi
1200 psi
100 psi
300 psi
700 psi
250 psi
200 psi
700 psi
420 psi
460 psi
500 psi
25 psi
3M™ Scotch-Weld™
Epoxy Adhesive
Epoxy Adhesive
Epoxy Adhesive
Scotch-Weld
Scotch-Weld
DP125 Gray
DP125 Gray
DP125 Gray
1700 psi
2300 psi
3300 psi
4500 psi
5000 psi
3500 psi
5400 psi
3000 psi
3400 psi
2200 psi
1900 psi
1800 psi
250 psi
500 psi
900 psi
400 psi
250 psi
880 psi
550 psi
520 psi
750 psi
60 psi