PROTEXT-DIN RF Solutions, PROTEXT-DIN Datasheet - Page 11

• Manufacturer Part Number: PROTEXT-DIN
• Description: MOD, DIN, GSM REMOTE CONTROL SYSTEM
• Manufacturer: RF Solutions

Specifications of PROTEXT-DIN

• Svhc: No SVHC (15-Dec-2010)
• Accessory Type: GSM Telemetry System
• Power Supply Output Voltage @ Current: 240VAC
• Supply Voltage: 24V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

12.
PLEASE NOTE: ~ Denotes a ‘space’ in the format of a message
DSPROTEXT-3 Mar 09
Text user after power
Change Of Status Of
Error in received
reset: (FAILED)
(!!ERROR!!)
Message
message
Inputs
Messages generated by PROTEXT
(IN)
This message reports a change of input state to the
designated mobile number (set using the INUM
command). A message is sent with the following
format.
A change of input will only be ‘valid’ after 5mSecs
Where the PROTEXT unit is processing an SMS
messages then the response time could be up to
250mS.
When an incoming SMS contains an error in the
message format, no action will be taken by the unit
other than to send an error message back to the
calling mobile along with a copy of the erroneous
message itself.
Texts will be sent to mobile phone numbers stored in
PNUM on reboot after a power failure or reset (when
power is reapplied).
Note this feature is enabled or disabled by simply
either having mobile phone numbers in PNUM or not.
PROTEXT - GSM R
Description
©2009 REG No 277 4001, ENGLAND.
EMOTE
<UNIT ID>~INn~x
n=input channel =1 or 2
x=inpupt status=ON or OFF
<UNIT ID>~m~!!ERROR!!
m=Your Message Returned
<UNIT ID>~
Reboot~power~had~failed
Message Syntax
C
ONTROL
Identity7~IN1~ON
Identity7~UPW~OUTn~OFF~!!ERRROR!!
Identity7~Reboot~power~had~failed
Example
Page 11