PROTEXT-DIN RF Solutions, PROTEXT-DIN Datasheet - Page 5

• Manufacturer Part Number: PROTEXT-DIN
• Description: MOD, DIN, GSM REMOTE CONTROL SYSTEM
• Manufacturer: RF Solutions

Specifications of PROTEXT-DIN

• Svhc: No SVHC (15-Dec-2010)
• Accessory Type: GSM Telemetry System
• Power Supply Output Voltage @ Current: 240VAC
• Supply Voltage: 24V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PROTEXT - GSM R
C
EMOTE
ONTROL
6. Power up
The PROTEXT unit can be powered from 12 or 24Vdc, a mains power supply is also available.
Connecting to the 3 pin terminal block provides the PROTEXT with power.
On power up the PWR LED will illuminate steady green.
The GSM engine takes several seconds to warm-up. The GSM LED may flash when the GSM engine is
active.
The GSM will come on after several seconds and should start to blink, indicating that the GSM modem has
registered with the network and that the unit is ready to accept user commands. The STAT LED blinks
whenever there is GSM activity, I.E. the unit is sending or receiving a text.
7. Power Loss
In the event of power loss to the PROTEXT the unit will maintain the user configured data entered during
the User set-up sequence, as this information is stored in non-volatile memory. However the status of the
relays will be lost.
8. User Set-Up of PROTEXT
Prior to usage, it is necessary to program the PROTEXT unit with the following parameters. (Some are optional)
Note that the User Password is case sensitive but the commands are not case sensitive and will be converted into
upper case before the unit handles them. This means that any user command responses, which echo the original
command will do so in upper case.
All commands are sent as text messages from a mobile phone.
9. PROTEXT Mounting Template
PROTEXT is designed to mount to a flat wall.
Page 5
DS PROTEXT-3 Mar 09
©2009 REG No 277 4001, ENGLAND.