ERJT06J272V Panasonic, ERJT06J272V Datasheet - Page 7

• Manufacturer Part Number: ERJT06J272V
• Description: RESISTOR, ANTI PULSE, 0805, 2K7, 5%
• Manufacturer: Panasonic

Specifications of ERJT06J272V

• Rohs Compliant: YES

Subject
Part No.
8. Environmental test
9. Resistance value marking
Chip Resistor
Temperature
Low
temperature
exposure
High
temperature
exposure
cycling
Humidity
(Steady state)
Load life
Load life in
humidity
Express resistance value on resin side with three digits.
“ - ” : Anti-Pulse type
Item
-123
∆R :
+/-(1%+0.05 ohm)
∆R :
+/-(1%+0.05 ohm)
∆R :
+/-(1%+0.05 ohm)
∆R :
+/-(1%+0.05 ohm)
∆R :
+/-(3%+0.1 ohm)
∆R :
+/-(3%+0.1 ohm)
Specification
PRODUCT SPECIFICATION FOR IMFORMATION 151-SRJ-ET0601A
Panasonic Electronic Devices Co., Ltd.
ERJT06
<Example>
-123 = 12k ohm
-2.2 = 2.2 ohm
The first two digits should be significant figures of
resistance for E-24 series and the third one denotes
number of zeros.
Decimal point should be expressed by “.”.
Resistors shall be exposed at -55 deg.C +/- 3
deg.C with no load for 1000 hours +48/-0
hours.
Resistors shall be exposed at 155 deg.C +/- 3
deg.C with no load for 1000 hours +48/-0
hours.
Resistors shall be tested for 5 cycles
continuously in accordance with the following
duty cycle.
Resistors shall be exposed at 60 deg.C +/- 2
deg.C and 90% to 95% relative hummidity in
a humidity test chamber for 1000 hours +48/-0
hours.
Resistors shall be operated at DC rated
voltage (1.5 hours "ON", 0.5 hours "OFF") for
1000 hours +48/-0 hours in a test chamber
controlled at 70 deg.C +/-2 deg.C.
Resistors shall be operated at DC rated
voltage (1.5 hours “ON”, 0.5 hours “OFF”) for
1000 hours +48/-0 hours in a test chamber
controlled at 60 deg.C +/- 2 deg.C and at
90% to 95% in relative hummidity.
Step Temperature (deg.C)
1
2
3
4
Room temperature
Room temperature
Test Method (JIS-C5201-1)
+155 +/-3
-55 +/-3
Spec. No.
Time (min.)
Max. 3
Max.3
11
30
30
-
6