AEAT-86AD-LASC0 Avago Technologies US Inc., AEAT-86AD-LASC0 Datasheet - Page 3

• Manufacturer Part Number: AEAT-86AD-LASC0
• Description: 12 Bits Multiturn HT MUIC Binary
• Manufacturer: Avago Technologies US Inc.
• Series: AEAT-86ADr

Specifications of AEAT-86AD-LASC0

• Encoder Type: Optical
• Output Type: Binary (Absolute)
• Pulses Per Revolution: 4096
• Voltage - Supply: 5VDC
• Actuator Type: 10mm Geared Center
• Detent: No
• Built In Switch: No
• Mounting Type: Chassis Mount
• Termination Style: Pin Strip
• Operating Supply Voltage (min): 5V
• Operating Supply Voltage (max): 5.5V
• Operating Temp Range: -40C to 125C
• Operating Temperature Classification: Automotive
• Output: Digital
• Operating Temperature Range: - 40 C to + 125 C
• Product: Optical
• Technology: Rotary
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Orientation: -
• Rotational Life (cycles Min): -
• Lead Free Status / Rohs Status: Compliant

Block Diagram and Detailed Description
Figure 3. Block Diagram
GENERAL
AEAT-86AD Multiturn Encoder Module is integrated with
a controller. The controller provides data synchronization
between Single Turn Absolute Encoder Module (i.e. AEAS-
7X00) and basic multiturn encoder module. Its combines
the serial data from both modules into combined (n
n
The most significant bit (MSB) will always be sent first to
DATA+.
With integrated RS422 line driver and receiver, the differ-
ential data transmission is compatible with EIA standard
RS-422.
SRCLK+ and SRCLK -
SRCLK input pins are used to clocked out the serial out-
puts data through the DATA pins. Lapse time between
words or subsequent data frame must be 40 µs or longer
for proper data transmission.
DATA+ and DATA -
DATA output pins provides positional information via
synchronous serial interface, which consists of n
of serial data from multiturn module and n
data from single turn module.
3
ST
) bit resolution to application end.
ST
bit of serial
MT
MT
bit
+
MSBINV
The MSB can be inverted (counting direction) by using
MSBINV.
STROBE
STROBE output pin can be used to determine whether
the data is locked or changing. It is high when date is
locked, but low when data is changing.
CONNECTION TO AEAS-7X00
Besides VDDA, VDD and GND of AEAS-7x00 need to be
connected to the Multiturn Encoder Module, data and
control i/o pins also need to be connected and soldered,
i.e. NSDOUT, N2SCL, N2NSL and N2DIN
NOTE:
n
n
MT
ST
= resolution of single turn module
= resolution of multiturn module