324544 Tyco Electronics, 324544 Datasheet - Page 9

• Manufacturer Part Number: 324544
• Description: CONN SPLICE BUTT 20-24 AWG
• Manufacturer: Tyco Electronics
• Series: Certi-Seal™r

Specifications of 324544

• Terminal Type: Butt Splice, Inline, Individual Openings
• Number Of Wire Entries: 2
• Termination: Crimp
• Wire Gauge: 20-24 AWG
• Insulation: Fully Insulated
• Color: Natural
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -

3.7. Bend Allowance
Upward and downward bend of the terminated terminal, splice, or end cap must be within the tolerance
provided in Figure 9.
3.8. Repair
Damaged or defective terminal, splice, or end cap must not be used. If damage is evident, the terminal, splice,
or end cap should be cut from the wire and replaced with a new one. Crimped terminals, splices, or end caps
MUST NOT be re–terminated or re–used by removing the wire.
Datum Line
Datum Line
Datum Line
Rev E
PIDG Terminals, Splices, and End Caps
Detail A
11
(Thinner Wire Insulation May Appear Slightly Different, But Will Perform the Same, Refer to Figure 2)
11
(Illustrations Represent Uppermost Wire Insulation Range of Terminal, Splice, or End Cap
Too Loose
Cross-Section of Insulation Crimp at Wire End of Terminal, Splice, or End Cap
T erminal, Splice, or
End Cap Insulation
Tyco Electronics Corporation
Detail B
Center of Crimp
Center of Splice
Center of Crimp
Figure 8
Figure 9
Terminal
End Cap
Splice
Correct
Wire
Insulation
Metal
Sleeve
Detail C
11
11
Too Tight
11
11
11
11
114-2157
9 of 14