ASMT-QGBE-NEG0E Avago Technologies US Inc., ASMT-QGBE-NEG0E Datasheet - Page 8

• Manufacturer Part Number: ASMT-QGBE-NEG0E
• Description: LED High Power (> 0.5 Watts) Green 0.5 Watt
• Manufacturer: Avago Technologies US Inc.

Specifications of ASMT-QGBE-NEG0E

• Power Rating: 0.5 W
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Handling Precaution
The encapsulation material of the product is made of
silicone for better reliability of the product. As silicone is a
soft material, please do not press on the silicone or poke
a sharp object onto the silicone. These might damage the
product and cause premature failure. During assembly
or handling, the unit should be held on the body only.
Please refer to Avago Application Note AN 5288 for detail
information.
Moisture Sensitivity
This product is qualified as Moisture Sensitive Level 2a
per Jedec J-STD-020. Precautions when handling this
moisture sensitive product is important to ensure the reli-
ability of the product. Do refer to Avago Application Note
AN5305 Handling of Moisture Sensitive Surface Mount
Devices for details.
A. Storage before use
B. Control after opening the MBB
C. Control for unfinished reel
D. Control of assembled boards
E. Baking is required if:
Recommended baking condition: 60±5°C for 20 hours.
8
- Unopen moisture barrier bag (MBB) can be stored
- It is not recommended to open the MBB prior to
- The humidity indicator card (HIC) shall be read
-
- For any unuse LEDs, they need to be stored in
-
- “10%” is Not Green and “5%” HIC indicator is Azure.
- The LEDs are exposed to condition of >30°C / 60%
- The LEDs floor life exceeded 672 hours.
at <40°C/90%RH for 12 months. If the actual shelf
life has exceeded 12 months and the HIC indicates
that baking is not required, then it is safe to reflow
the LEDs per the original MSL rating.
assembly (e.g. for IQC).
immediately upon opening of MBB.
and all high temperature related process including
soldering, curing or rework need to be completed
within 672 hours.
sealed MBB with desiccant or desiccator at <5%RH.
to other high temperature processes, the PCB
need to be stored in sealed MBB with desiccant
or desiccator at <5%RH to ensure no LEDs have
exceeded their floor life of 672 hours.
RH at any time.
The LEDs must be kept at <30°C / 60%RH at all time
If the PCB soldered with the LEDs is to be subjected
Device Color (X
Flux Bin Select (X
Individual reel will contain parts from one bin only
Flux Bin Limits
Tolerance of each bin limit = ± 12%
Color Bin Select (X
Individual reel will contain parts from one full bin only.
B
G
X
X
Bin ID
0
A
B
C
D
E
F
G
H
J
K
L
X
0
A
B
C
G
H
Z
4
2
3
1
)
2
4
X
)
3
)
Min. (lm)
3.40
4.30
5.50
7.00
9.00
11.50
15.00
19.50
25.50
33.00
43.00
56.00
Min Flux Bin
Max Flux Bin
Blue
Green
Full Distribution
1 and 2 only
2 and 3 only
3 and 4 only
1, 2 and 3 only
2, 3 and 4 only
Special binning
Max. (lm)
4.30
5.50
7.00
9.00
11.50
15.00
19.50
25.50
33.00
43.00
56.00
73.00