142-5701-206 Emerson Network Power, 142-5701-206 Datasheet - Page 222

• Manufacturer Part Number: 142-5701-206
• Manufacturer: Emerson Network Power
• Type: SMAr

Specifications of 142-5701-206

• Gender: F
• Body Style: Straight
• Terminate To: PCB
• Mounting Style: Through Hole
• Termination: Solder
• Operating Temp Range: -65C to 165C
• Body Plating: Nickel
• Contact Plating: Gold
• Contact Material: Beryllium Copper
• Insulation Material: Polytetrafluoroethyl
• Body Material: Brass
• Product Height (mm): 9.52mm
• Impedance: 50Ohm
• Lead Free Status / RoHS Status: Supplier Unconfirmed

222
Assembly Instructions
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
SMA Solder Type Straight Jacks, Straight Plugs, and
Straight Bulkhead Jacks for Semi-Rigid Cable
Connectivity Solutions
Tel: [phone]
•
Fax: [phone]
•
www.EmersonNetworkPower.com/connectivity
CABLE GROUP
(.086 Semi-Rigid)
(.141 Semi-Rigid)
RG-405/U
RG-402/U
1. Identify connector parts. (2 piece parts)
2. Strip cable to dimensions shown. Do not nick
3. Place center contact on center conductor
4. Insert contact and cable into body assembly
center conductor.
making sure contact bottoms against cable
insulation. Solder center conductor to center
contact through solder hole. Solder must not
be allowed to run on outside of contact. Use
a minimum amount of solder for a good joint.
.020 (0.51) diameter solder is recom-
mended. Trim excess insulation.
making sure cable is bottomed against
insulator in body. Solder body to cable. Use a
minimum amount of heat to minimize cable
insulation movement.
142-0593-001/006
142-0593-401/406
142-0593-411/416
142-0693-001/006
142-0594-001/006
142-0594-401/406
142-0694-001/006
PART NO.
.085 (2.16)
.070 (1.78)
“A”