142-5701-206 Emerson Network Power, 142-5701-206 Datasheet - Page 224

• Manufacturer Part Number: 142-5701-206
• Manufacturer: Emerson Network Power
• Type: SMAr

Specifications of 142-5701-206

• Gender: F
• Body Style: Straight
• Terminate To: PCB
• Mounting Style: Through Hole
• Termination: Solder
• Operating Temp Range: -65C to 165C
• Body Plating: Nickel
• Contact Plating: Gold
• Contact Material: Beryllium Copper
• Insulation Material: Polytetrafluoroethyl
• Body Material: Brass
• Product Height (mm): 9.52mm
• Impedance: 50Ohm
• Lead Free Status / RoHS Status: Supplier Unconfirmed

224
Assembly Instructions
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
SMA Solder Type Straight Plugs
for Semi-Rigid Cable
Connectivity Solutions
Tel: [phone]
•
Fax: [phone]
•
www.EmersonNetworkPower.com/connectivity
1. Identify connector parts. (2 piece parts)
2. Strip cable to dimensions shown. Do not nick
3. Insert cable into body making sure cable jacket
4. Thread coupling nut over body.
center conductor. Bevel the cable center
conductor per contact detail of SMA interface
on page 24. Slide coupling nut onto cable as
shown.
is bottomed against shoulder inside of body.
Solder body to cable. Use a minimum amount
of heat to minimize cable insulation movement.
Trim expanded insulation flush with front of body
or fixture body and cable during soldering to
prevent insulation expansion.
(.141 Semi-Rigid)
CABLE GROUP
RG-402/U
142-0694-021
142-0694-026
142-0694-041
142-0694-046
PART NO.