7009 Aeroflex, 7009 Datasheet - Page 3

• Manufacturer Part Number: 7009
• Manufacturer: Aeroflex

Specifications of 7009

• Lead Free Status / RoHS Status: Compliant

Connector Systems
Applications
Ideal applications for these high quality/high frequency connectors range from mass-mount and receiver interface subsys-
tems that house hundreds of high frequency connectors to single connector configurations. In either case these connectors
allow threadless connector mating which is very useful when mating an array of connectors on one RF module to another
array or connector within seconds.
Figure 2 shows a typical application where each connector half contains 7035R series connectors. These connectors con-
tain spring loaded inner/outer contacts which allows for extremely long contact life as well as 0.02 per pair maximum radial
and axial offset misalignment while still meeting all the specified electrical specifications.
Aeroflex / Weinschel offers a variety of standard models which are designed to fit or be configured into a wide range of
applications:
o Pressurized Designs - Model 7008 (page 220) is equipped with a flange arrangement designed to withstand 1000 PSI
o Rear Locking - Models 7034 & 7034-1 (page 221) are beneficial in applications where there is easy access to the front
o Front Locking - Models 7035, 7035-1, 7035R, 7035R-1 (page 222) & 7041 (New..page 223) are beneficial in applica-
o Custom Configurations - Other types of Planar Blind-mate connectors such as SMA, SMB, 3.5mm, flange,
of hydrostatic pressure. This model can be mated with another 7008 or any 7034 or 7035 series Planar Blind-mate. See
page 218 for mating applications.
of the connector for holding while the cable and connector is added or removed. Rotation is also prevented if the
connector front is inserted in a slot which could allow for easier cable and connector assembly installation.
tions where the cable and connector will be inserted as an assembly into a panel or connector module from the rear.
microstrip/pc board mount launch, test probes, frequency specific, arrays or interface subsystems can be designed for
your particular application. Refer to page 222-224 for other examples.
5305 Spectrum Drive, Frederick, MD 21703-7362 TEL: [phone]
web: www.aeroflex.com/weinschel
Figure 2. Typical Application
email: [e-mail]
Fax: [phone]
Revision Date: 3/10/09
219