7009 Aeroflex, 7009 Datasheet - Page 9

• Manufacturer Part Number: 7009
• Manufacturer: Aeroflex

Specifications of 7009

• Lead Free Status / RoHS Status: Compliant

Connector Systems
Example 6:
A
B
Example 6 shows a blind-mate connector sys-
tem that was designed to interface with many
different specified requirements.
Connector A is a 3.5mm to blind-mate inter-
face which contains fixed inner and outer
contacts; used for connection to other coaxial
components such as attenuators, terminations
and dc blocks.
Connector B is a blind-mate to 2.92mm panel
adapter design with a spring loaded inner and
outer contacts.
Connector C is a blind-mate interface connec-
C
tor that can be easily installed to coaxial
cables or printed circuit board assemblies.
Example 7:
This example illustrates a low cost blind-mate to SMB con-
figuration specifically designed and optimized for RF &
wireless applications. These connectors offer not only all
the features of the Planar Blind-mate interface but the SMB
connector provides an additional quick disconnect for cable
assemblies.
Specifications for this connector include dc to 2.0 GHz oper-
ation, 50 Ω nominal impedance, insertion loss of 0.35 dB,
SWR of 1.15-1.30, radial/axial misalignment of +0.020”
OFFSET (blind-mate side), operating temperature of
+10°C to +40°C, dielectric withstanding voltage of 1000 Vac
and a insulation resistance of 1000 MΩ nominal.
These stainless steel connectors contain non-piloting con-
tacts that provides long life (1,000,000 matings) and offers
a repeatability of +0.05 dB typical.
NOTE: All dimensions are given in mm (inches) and are maximum, unless otherwise specified.
225
5305 Spectrum Drive, Frederick, MD 21703-7362 TEL: [phone]
Fax: [phone]
web: www.aeroflex.com/weinschel
email: [e-mail]
Revision Date: 3/10/09