2222 33629044 Vishay, 2222 33629044 Datasheet - Page 10

• Manufacturer Part Number: 2222 33629044
• Manufacturer: Vishay

Specifications of 2222 33629044

• Tolerance (+ Or -): 20%
• Temp Coeff (dielectric): PLYP
• Mounting Style: Through Hole
• Construction: Radial
• Failure Rate: Not Required
• Seated Plane Height: 15.5mm
• Product Diameter (mm): Not Requiredmm
• Product Height (mm): 15.5mm
• Product Depth (mm): 6mm
• Product Length (mm): 26mm
• Lead Spacing (nom): 22.5mm
• Lead Diameter (nom): 0.8mm
• Operating Temp Range: -55C to 110C
• Capacitance: .15uF
• Package / Case: Not Required
• Lead Free Status / RoHS Status: Compliant

www.vishay.com
10
MKP336 2 X2
Vishay BCcomponents
APPROVALS
MOUNTING
Normal Use
The capacitors are designed for mounting on printed -circuit boards.The capacitors packed in bandoliers are designed for
mounting in pinted-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to “Packaging
information”:
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be insured that the stand-off pips are in good contact with the printed circuit
board:
• For pitches ≤ 15 mm capacitors shall be mechanically fixed by the leads
•
Space Requirements on Printed Circuit Board
The maximum space for length (I
board is shown in the drawings.
• For products with pitch ≤ 15 mm, Δw = Δl = 0.3 mm; Δh = 0.1 mm
• For products with 15 mm < pitch ≤ 27.5 mm, Δw = Δl = 0.5 mm; Δh = 0.1 mm
Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product
concerned.
SOLDERING CONDITIONS
For general soldering conditions and wave soldering profile, we refer to the application note:
“Soldering Guidelines for Film Capacitors”:
Storage Temperature
• Storage temperature: T
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all elctrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of
86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
SAFETY APPROVALS X2
EN 60384-14 ed 3 (ENEC)
(= IEC 60384-14 ed 3)
UL1414 and CSA-C22.2 No. 1
UL1283
CSA-E 384-14
CQC
CB Test Certificate
The Enec-approval together with the CB-Certificate replace all national marks of the following countries (they have already signed the
ENEC-Agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg;
Netherlands; Norway; Portugal; Slovenian; Spain; Sweden; Switzerland and United Kingdom.
For larger pitches the capacitors shall be mounted in the same way and the body clamped.
www.vishay.com/doc?28139
16
stg
= - 25 °C to + 40 °C with RH maximum 80 % without condensation
VOLTAGE
310 V
250 V
305 V
310 V
310 V
310 V
max.
Eccentricity
), width (w
AC
AC
AC
AC
AC
AC
C
For technical questions, contact:
www.vishay.com/doc?28171
max.
Interference Suppression Film Capacitors
®
) and heigth (h
US
I
max.
= I + Δ
MKP Radial Potted Type
1 nF to 2.2 µF
1 nF to 1 µF
1 nF to 2.2 µF
1 nF to 2.2 µF
1 nF to 2.2 µF
1 nF to 2.2 µF
VALUE
max.
) of film capacitors to take in account on the printed circuit
[e-mail]
h
max.
w
max.
= h + Δ
= W + Δ
CBA116
Seating plane
FILE NUMBERS
FI 2008038 A1
E112471
E109565
2123580
CQC07001021280 (L)
CQC04001009262 (F)
FI 5123 A1
Document Number: 28120
CQC
Revision: 22-Dec-10