2222 33629044 Vishay, 2222 33629044 Datasheet - Page 16

• Manufacturer Part Number: 2222 33629044
• Manufacturer: Vishay

Specifications of 2222 33629044

• Tolerance (+ Or -): 20%
• Temp Coeff (dielectric): PLYP
• Mounting Style: Through Hole
• Construction: Radial
• Failure Rate: Not Required
• Seated Plane Height: 15.5mm
• Product Diameter (mm): Not Requiredmm
• Product Height (mm): 15.5mm
• Product Depth (mm): 6mm
• Product Length (mm): 26mm
• Lead Spacing (nom): 22.5mm
• Lead Diameter (nom): 0.8mm
• Operating Temp Range: -55C to 110C
• Capacitance: .15uF
• Package / Case: Not Required
• Lead Free Status / RoHS Status: Compliant

www.vishay.com
16
MKP336 2 X2
Vishay BCcomponents
SUB-CLAUSE NUMBER AND
TEST
SUB-GROUP C4
4.15 Charge and discharge
4.15.1 Initial measurements
4.15.3 Final measurements
SUB-GROUP C5
4.16 Radio frequency
characteristic
SUB-GROUP C6
4.17 Passive flammability
SUB-GROUP C7
4.18 Active flammability
Class B
10 000 cycles
Charged to 435 V
Discharge resistance:
Tangent of loss angle:
For C ≤ 1 µF at 10 kHz
For C > 1 µF at 1 kHz
Tangent of loss angle
Insulation resistance
Resonance frequency
Bore of gas jet: Ø 0.5 mm
Fuel: Butane
Test duration for actual volume V in mm³:
V ≤ 250: 10 s
250 < V ≤ 500: 20 s
500 < V ≤ 1750: 30 s
V > 1750: 60 s
One flame application
20 cycles of 2.5 kV discharges on the test
capacitor connected to U
Capacitance
Capacitance
R
=
---------------------------------------------- -
1.25
For technical questions, contact:
435 V
×
C dU dt
Interference Suppression Film Capacitors
(
DC
CONDITIONS
45.0°
DC
⁄
)
RAC
~ 8 mm
MKP Radial Potted Type
12 mm
[e-mail]
¦ΔC/C¦ ≤ 10 % compared to values measured in
4.15.1.
Increase of tan δ:
≤ 0.008 for: C ≤ 1 µF or
≤ 0.005 for: C > 1 µF
Compared to values measured in 4.15.1.
≥ 50 % of values specified in section “Insulation
Resistance” of this specification
≥ 0.9 times the value as specified in section
“Resonant Frequency” of this specification
After removing test flame from capacitor, the
capacitor must not continue to burn for more than
10 s. No burning particle must drop from the
sample.
The cheese cloth around the capacitors shall not
burn with a flame.
No electrical measurements are required.
PERFORMANCE REQUIREMENTS
Document Number: 28120
Revision: 22-Dec-10