ST92163-EMU2 STMicroelectronics, ST92163-EMU2 Datasheet - Page 5

• Manufacturer Part Number: ST92163-EMU2
• Description: MCU, MPU & DSP Development Tools ST9 Emulator Board
• Manufacturer: STMicroelectronics

Specifications of ST92163-EMU2

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

DEVELOPING ST92F250 APPLICATIONS USING THE ST92F150-EMU2 EMULATOR
2 ST92F250 EMULATION
As stated in the previous chapter, an ST92F250 application with the following characteristics
can be emulated by a ST92F150 emulator without any restrictions:
– Second I2C not used.
– SCI-A LIN Master feature not used.
– P3.0, P6.6 and P6.7 not used.
– I/O configuration changed in the first step of the application code.
– Application not impacted by the ADC parasitic diode.
In all other cases the differences must be taken into account during the application develop-
ment using the ST92F150 emulation to anticipate the application behaviour on the ST92F250.
Flash management and the new features (second I2C, SCI-A LIN Master mode and new I/Os)
must be validated in the ST92F250 device in the application.
The following ST9 HDS2V2 emulators and emulation probes support upgrades and/or recon-
figuration with new probe hardware:
– ST92F150-EMU2
– ST92F120-EMU2
– ST90158-EMU2 and ST90158-EMU2B
– ST92141-EMU2
– ST92163-EMU2
To upgrade a ST92F120 Emulator to a ST92F150 Emulator, refer to application note AN977
Guidelines for upgrading from the ST92F120 (0.50µm) to the ST92F124 and ST92F150 (0.35
µm).
5/8