EVB-EMC2101 SMSC, EVB-EMC2101 Datasheet - Page 3

• Manufacturer Part Number: EVB-EMC2101
• Description: MCU, MPU & DSP Development Tools Evaluation Board
• Manufacturer: SMSC

Specifications of EVB-EMC2101

• Processor To Be Evaluated: EMC2101
• Interface Type: USB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

EVB-EMC2101 User Manual
2 Getting Started
2.1
2.2
2.3
SMSC EMC2101
System Requirements
Feature Summary
Installing the EVB
To use the EVB you will need:
n
n
n
n
n
n
n
n
n
n
1. Install the Chip Manager (ChipMan) application and device driver on a PC by running Setup.exe
2. Connect the supplied USB cable to an available USB port on the PC. Plug the “mini-B” end of the
3. Start the EVB Software by selecting the Chip Manager application from the SMSC folder from the
Note: The SMSC ChipMan application allows viewing and changing register values for a variety of
A PC running Windows 2000 or XP
Display resolution 800x600 (or larger to view several windows simultaneously)
An available USB port
Chip Manager (SMSC application) allows viewing and changing register values
Graphing of any register
Headers for connecting a remote diode or CPU/GPU thermal diode
Resistance Error Correction verification
Autonomous register loading via included EEPROM (EMC2101-R only)
USB communication to evaluation board
An external SMBus master may also be used via jumper settings
from the ChipMan distribution CD. A revision history and install/uninstall notes may be found in the
readme.txt file on the disk.
USB cable into EVB connector P6. The +3.3V and Bridge ACT LEDs should illuminate. After the
EVB is connected to the PC the “Find New Hardware” wizard will pop up for USB driver installation.
Follow the instructions in the readme.txt file to complete the installation process.
Programs Windows Start menu. The EVB will initialize and the Chip Manager Quick Help screen
will appear as in
running. For more help with ChipMan, select Help -> Contents for an html based help document
as shown in
EVBs including the EMC1001, EMC1002, EMC1023, EMC1033 and EMC2101. The ChipMan
software only needs to be installed once to support all of these EVBs. The list of supported
EVBs may be found in the pulldown menu under Options -> Select Device.
Figure
Figure
2.2.
2.1. The USBAct LED should be blinking when the Chip Manager is
3
Revision 1.5 (12-13-06)