4432-DKDB2 Silicon Laboratories Inc, 4432-DKDB2 Datasheet - Page 33

• Manufacturer Part Number: 4432-DKDB2
• Description: WiFi / 802.11 Modules & Development Tools Single Antenna TRx Testcard Hi band
• Manufacturer: Silicon Laboratories Inc

Specifications of 4432-DKDB2

• Modulation: GFSK
• Operating Voltage: 3.3 V
• Antenna: SMA
• For Use With/related Products: Si4432
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

7.2.7. Receiver Measurements
7.2.7.1. Bit Error Rate Test
Using the BER Lab Mode users may evaluate the following:
1. BER Sensitivity.
2. Direct mode operation using a continuous data streams
3. Receiver modem parameters:
7.2.7.2. Test Method
1. Set frequency, modulation type, data rate and deviation parameters on the RF signal generator.
2. Select the desired data source for the RF generator (e.g. PN9)
3. Connect the receiver's input to the signal generator's output.
1. Ensure Function is set to “Lab”
2. Set Lab Mode to “BER”
3. Press <GO> to move on from this screen.
1. Selections here should match those previously entered into the RF Signal Generator
2. Press <GO> to move on from this screen.
i. Automatic Frequency Control
ii. Blocking
iii. Selectivity
Figure 43. Setup Screen (1 of 4)
Figure 44. Setup Screen (2 of 4)
Rev. 0.4
SDBC-DK3 UG
33