350699-1 TE Connectivity, 350699-1 Datasheet - Page 2

• Manufacturer Part Number: 350699-1
• Description: UMNL SPLIT PIN PTPBR
• Manufacturer: TE Connectivity
• Type: Contactr

Specifications of 350699-1

• Gender: Pin
• Body Orientation: Straight
• Housing Material: Not Required
• Number Of Contacts: 1POS
• Number Of Ports: 1Port
• Number Of Terminals: 1
• Current Rating (max): 19A
• Pitch (mm): Not Requiredmm
• Contact Material: Brass
• Operating Temp Range: -55C to 125C
• Voltage Rating Max: 600VAC
• Mounting Style: Cable
• Termination Method: Crimp
• Contact Plating: Pre-Tin
• Product Height (mm): 3.68mm
• Product Depth (mm): 3.56mm
• Product Length (mm): 20.07mm
• Product Type: Contacts
• Contact Gender: Pin (Male)
• Voltage Rating: 600 V
• Current Rating: 19 A
• Termination Style: Quick Connect
• Wire Gauge Range: 24-18
• Product Line: Universal MATE-N-LOK
• Insulation Diameter (mm [in]): 1.02-2.54 [.040-.100]
• High Current: No
• Current Rating (a): 19
• Voltage (vac): 600
• Solder Tail Contact Plating: Pre-Tin
• Wire Range (mm [awg]): 0.20-0.80² [24-18]
• Contact Diameter (mm [in]): 2.18 [0.086]
• Pin Style: Split
• Stock Thickness (mm [in]): 0.30 [0.012]
• Contact Type: Pin
• Contact Termination Type: Crimp
• Contact Base Material: Brass
• Sealable: No
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Wire/Cable
• Packaging Method: Strip
• Lead Free Status / RoHS Status: Compliant

3.4.
3.5.
Examination of product.
Termination resistance, specified
current.
Termination resistance, dry circuit.
Dielectric withstanding voltage.
Insulation resistance.
Temperature rise vs current.
See Note (a).
Vibration.
Rev L
Performance and Test Description
Product is designed to meet the electrical, mechanical and environmental performance requirements
specified in Figure 1.
Test Requirements and Procedures Summary
Test Description
Meets requirements of product
drawing and Application
Specification 114-1010.
(AWG) (amperes)
3.5 milliohms maximum initial.
5.0 kilovolts AC dielectric
withstanding voltage, 1 minute hold.
1000 megohms minimum initial.
100 megohms minimum final.
Temperature rise, see Figures 4
and 5.
Temperature resistance, specified
current.
No discontinuities greater than 10
microseconds.
5.0 milliohms maximum termination
resistance, dry circuit.
See Note (b).
Wire
Size
24
22
20
18
16
14
Figure 1 (continued)
Current
10.0
Test
MECHANICAL
ELECTRICAL
1.5
3.0
4.5
6.0
8.0
Requirement
Maximum Initial
Resistance,
(milliohms)
3.50
3.50
3.00
3.00
2.75
2.75
Visual and dimensional and
functional per applicable inspection
plan.
TE Spec 109-25.
Measure potential drop of mated
contacts assembled in housing.
Calculate resistance.
See Figure 3.
TE Spec 109-6, Condition A.
Subject mated contacts assembled
in housing to 50 millivolt maximum
open circuit at 100 milliamperes
maximum.
See Figure 3.
TE Spec 109-29-1.
Test between adjacent contacts of
mated connector assemblies.
TE Spec 109-28.
Test between adjacent contacts of
mated connector assemblies.
TE Spec 109-45.
Temperature rise at rated current.
TE Spec 109-21, Condition A.
Subject mated connectors to 10-55-
10 Hz traversed in 1 minute at 1.5
mm [.06 in] total excursion. Two
hours in each of 3 mutually
perpendicular directions.
Procedure
108-1031
2 of 8