1-1586037-6 TE Connectivity, 1-1586037-6 Datasheet - Page 3

• Manufacturer Part Number: 1-1586037-6
• Description: PLUG & SOCKET CONN, HEADER, 16POS, 4.2MM
• Manufacturer: TE Connectivity
• Type: Powerr
• Series: VAL-U-LOKr

Specifications of 1-1586037-6

• Gender: HDR
• Body Orientation: Straight
• Housing Material: Nylon
• Number Of Contacts: 16POS
• Number Of Ports: 1Port
• Number Of Terminals: 16
• Current Rating (max): 9/ContactA
• Pitch (mm): 4.2mm
• Contact Material: Brass
• Operating Temp Range: -40C to 105C
• Voltage Rating Max: 600VAC
• Mounting Style: Through Hole
• Termination Method: Solder
• Contact Plating: Tin
• Product Height (mm): 12.8mm
• Pitch Spacing: 4.2mm
• Contact Termination: Through Hole
• No. Of Contacts: 16
• No. Of Rows: 2
• Connector Mounting: PCB
• Rohs Compliant: Yes
• Product Type: Connector
• Connector Type: Header
• Termination Method To Pc Board: Through Hole - Solder
• Pcb Mounting Orientation: Vertical
• Pcb Mount Alignment: Without
• Pcb Mount Retention: Without
• Shrouded: Yes
• Sealed: No
• Ul File Number: E28476
• Csa File Number: 208567
• Mating Retention Type: Latching
• Contact Current Rating, Max (a): 9
• Operating Voltage Reference: AC
• Operating Voltage (vac): 600
• Wire/cable Size (awg): 16 – 26
• Wire/cable Size (mm²): 0.12 – 1.4
• Tail Orientation: In-line
• Tail Length (mm [in]): 3.5 [0.138]
• Profile Height (y-axis) (mm [in]): 12.80 [0.504]
• Header Type: Shrouded
• Number Of Positions: 16
• Number Of Rows: 2
• Centerline (mm [in]): 4.20 [0.165]
• Mating Retention: With
• Selectively Loaded: No
• Length (x-axis) (mm [in]): 34.80 [1.3701]
• Width (z-axis) (mm [in]): 9.80 [0.386]
• Contact Type: Pin
• Contact Base Material: Brass
• Contact Plating, Mating Area, Material: Tin
• Contact Plating, Mating Area, Thickness (µm [?in]): 2.54 [100]
• Tail Plating Material: Tin
• Tail Plating, Thickness (µm [?in]): 2.54 [100]
• Contact Design: Square Post
• Connector Style: Plug
• Mating Alignment: With
• Mating Alignment Type: Keyed
• Housing Color: Natural
• Ul Flammability Rating: UL 94V-2
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Agency/standard: UL, CSA
• Ul Rating: Recognized
• Circuit Identification Feature: With
• Operating Temperature (°c [°f]): -40 – +105 [-40 – +221]
• Applies To: Printed Circuit Board
• Pcb Thickness, Recommended (mm [in]): 1.60 [0.063]
• Application Use: Wire-to-Board
• Contact Transmits (typical Application): Signal (Data)
• Pick And Place Cover: Without
• Packaging Method: Tray
• Lead Free Status / RoHS Status: Compliant

Durability.
Crim p pull-out force.
Locking force.
Unlocking force.
Term inal insertion.
Term inal retention.
Therm al shock.
Hum idity, steady state.
Heat resistance.
Cold resistance.
Rev B
Test Description
30 N m inim um .
See Note.
88 N m inim um for 18 AW G wire;
59 N m inim um for 20 AW G wire;
39 N m inim um for 22 AW G wire;
29 N m inim um for 24 AW G wire;
20 N m inim um for 26 AW G wire.
41.2 N m axim um for 6 position.
2.4 N m inim um for 6 position.
15 N m axim um .
See Note.
See Note.
See Note.
See Note.
Figure 1 (continued)
ENVIRONMENTAL
Requirem ent
EIA-364-13.
EIA-364-5.
EIA-364-5.
EIA-364-9.
Mate and unm ate specim ens with
H-04 hardness for 50 cycles, and
specim ens with H-06 hardness for
30 cycles at a m axim um rate of 10
cycles per m inute.
EIA-364-29.
Measure force necessary to rem ove
the wire from the crim p at a
m axim um rate of 12.7 m m per
m inute.
EIA-364-13.
Measure force necessary to m ate
specim ens at a m axim um rate of
12.7 m m per m inute.
Measure force necessary to unm ate
specim ens at a m axim um rate of
12.7 m m per m inute.
Measure force necessary to
properly seat the term inal into the
housing at a m axim um rate of 12.7
m m per m inute.
Measure force necessary to rem ove
the term inal from the housing at a
m axim um rate of 12.7 m m per
m inute.
EIA-364-32.
Subject m ated specim ens to 5
cycles between -55 and 105°C with
30 m inute dwells at tem perature
extrem es and 1 m inute transition
between tem peratures.
EIA-364-31.
Subject specim ens to 40°C and 90
to 95% RH for 96 hours.
EIA-364-17.
Subject m ated specim ens to 105°C
for 96 hours.
EIA-364-59, Condition 3, Duration
D.
Subject m ated specim ens to -40°C
for 96 hours.
Procedure
108-2112
3 of 5