66597-1 TE Connectivity, 66597-1 Datasheet - Page 3

• Manufacturer Part Number: 66597-1
• Description: III+ PIN,18-14,TIN-LEAD,STRIP
• Manufacturer: TE Connectivity
• Type: Contactr
• Series: Type III+r

Specifications of 66597-1

• Gender: M
• Body Orientation: Straight
• Housing Material: Not Required
• Number Of Contacts: 1POS
• Number Of Ports: 1Port
• Number Of Terminals: 1
• Pitch (mm): Not Requiredmm
• Contact Material: Brass
• Mounting Style: Cable
• Termination Method: Crimp
• Contact Plating: Bright Tin-Lead
• Product Height (mm): 4.24mm
• Product Depth (mm): 4.32mm
• Product Length (mm): 26.75mm
• Rohs Compliant: NO
• Insulation Support: Yes
• Termination Method To Wire/cable: Crimp
• Wire/cable Type: Discrete Wire
• Grade: Commercial
• High Current: No
• Termination End Plating: Bright Tin-Lead
• Pin Diameter (mm [in]): 1.57 [0.062]
• Wire Range (mm [awg]): 0.80-2.00² [18-14]
• Spring Material: Stainless Steel
• Used With: M Series Connectors, CPC Connectors
• Contact Type: Pin
• Contact Classification: Signal
• Contact Plating, Mating Area, Material: Bright Tin-Lead
• Contact Base Material: Brass
• Contact Size: 16
• Rohs/elv Compliance: Not ELV/RoHS compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Accepts Wire Insulation Diameter, Range (mm [in]): 2.79 – 3.81 [0.110 – 0.150]
• Applies To: Wire/Cable
• Test Current (a): 13.0
• Packaging Method: Strip
• Packaging Quantity: 4,000/Reel
• Lead Free Status / RoHS Status: Not Compliant

3.6.
Mixed flowing gas.
Rev A
NOTE
Product Qualification and Requalification Test Sequence
NOTE
Test Description
Shall meet visual requirements, show no physical damage and shall meet requirements of
additional tests as specified in Test Sequence in Figure 2.
(a)
(b)
(c)
(d)
(e)
See paragraph 4.1.A.
Numbers indicate sequence in which tests are performed.
Discontinuities shall not be measured. Energize at 18°C level for 100% loadings per Test
Specification 109-151.
Tin plated samples only. Precondition by mating and unmating for 50 cycles.
Gold plated samples only. Precondition by mating and unmating for 500 cycles.
Exam ination of product
Term ination resistance
Tem perature rise vs current
Vibration
Hum idity-tem perature cycling
Tem perature life
Mixed flowing gas
Test or Exam ination
See Note.
Figure 1 (end)
Requirem ent
Figure 2
Test Sequence (b)
Test Group (a)
5(c)
3(d)
3(e)
1,8
2,6
1
7
4
TE Spec 109-85-2.
Subject m ated sam ples to
environm ental class II for 14 days.
Procedure
108-10033-1
3 of 10