CS8415A-CZ Cirrus Logic Inc, CS8415A-CZ Datasheet - Page 27

• Manufacturer Part Number: CS8415A-CZ
• Description: Receiver IC
• Manufacturer: Cirrus Logic Inc

Specifications of CS8415A-CZ

• Driver Case Style: TSSOP
• No. Of Pins: 28
• Mounting Type: Surface Mount
• No. Of Channels: 7
• Peak Reflow Compatible (260 C): No
• Supply Voltage: 5V
• Supply Voltage Max: 5V
• Leaded Process Compatible: No
• Interface Type: Serial
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

If the category code is set to General in the incoming AES3 stream, copyright will always be indicated by COPY,
even when the stream indicates no copyright.
Note:
8.12
This register contains the AES3 receiver and PLL status bits. Unmasked bits will go high on occurrence of the error,
and will stay high until the register is read. Reading the register resets all bits to 0, unless the error source is still
true. Bits that are masked off in the receiver error mask register will always be 0 in this register. This register defaults
to 00h.
DS470PP3
7
0
Receiver Error (10h) (Read Only)
ORIG - SCMS generation indicator, decoded from the category code and the L bit.
COPY and ORIG will both be set to 1 if the incoming data is flagged as professional, or if the receiver is not
QCRC - Q-subcode data CRC error indicator. Updated on Q-subcode block boundaries
CCRC - Channel Status Block Cyclic Redundancy Check bit. Updated on CS block boundaries,
valid in Pro mode
UNLOCK - PLL lock status bit. Updated on CS block boundaries.
V - Received AES3 Validity bit status. Updated on sub-frame boundaries.
CONF - Confidence bit. Updated on sub-frame boundaries.
BIP - Bi-phase error bit. Updated on sub-frame boundaries.
PAR - Parity bit. Updated on sub-frame boundaries.
in use.
QCRC
1 - Received data is original
1 - Error
1 - Error
1 - PLL out of lock
1 - Data is invalid, or may be valid compressed audio
1 - Confidence error. This indicates that the received data eye opening is less than half a bit
period, indicating a poor link that is not meeting specifications.
1 - Bi-phase error. This indicates an error in the received bi-phase coding.
1 - Parity error
0 - Received data is 1st generation or higher
0 - No error
0 - No error
0 - PLL locked
0 - Data is valid and is normally linear coded PCM audio
0 - No error
0 - No error
0 - No error
6
CCRC
5
UNLOCK
4
3
V
CONF
2
BIP
1
CS8415A
PAR
0
27