CS8415A-CZ Cirrus Logic Inc, CS8415A-CZ Datasheet - Page 28

• Manufacturer Part Number: CS8415A-CZ
• Description: Receiver IC
• Manufacturer: Cirrus Logic Inc

Specifications of CS8415A-CZ

• Driver Case Style: TSSOP
• No. Of Pins: 28
• Mounting Type: Surface Mount
• No. Of Channels: 7
• Peak Reflow Compatible (260 C): No
• Supply Voltage: 5V
• Supply Voltage Max: 5V
• Leaded Process Compatible: No
• Interface Type: Serial
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

8.13
The bits in this register serve as masks for the corresponding bits of the Receiver Error Register. If a mask bit is set
to 1, the error is unmasked, meaning that its occurrence will appear in the receiver error register, will affect the RERR
pin, will affect the RERR interrupt, and will affect the current audio sample according to the status of the HOLD bit.
If a mask bit is set to 0, the error is masked, meaning that its occurrence will not appear in the receiver error register,
will not affect the RERR pin, will not affect the RERR interrupt, and will not affect the current audio sample. The
CCRC and QCRC bits behave differently from the other bits: they do not affect the current audio sample even when
unmasked. This register defaults to 00h.
8.14
28
7
0
7
0
Receiver Error Mask (11h)
Channel Status Data Buffer Control (12h)
BSEL - Selects the data buffer register addresses to contain User data or Channel Status data
CBMR - Control for the first 5 bytes of channel status “E” buffer
DETCI - D to E C-data buffer transfer inhibit bit.
CAM - C-data buffer control port access mode bit
CHS - Channel select bit
QCRCM
1 - Data buffer address space contains User data
1 - Prevent D to E buffer transfers from overwriting first 5 bytes of channel status data
1 - Inhibit C-data D to E buffer transfers
1 - Two byte mode
Default = ‘0’
0 - Data buffer address space contains Channel Status data
Default = ‘0’
0 - Allow D to E buffer transfers to overwrite the first 5 bytes of channel status data
Default = ‘0’
0 - Allow C-data D to E buffer transfers
Default = ‘0’
0 - One byte mode
Default = ‘0’
0 - Channel A information is displayed at the EMPH pin and in the receiver channel status reg-
1 - Channel B information is displayed at the EMPH pin and in the receiver channel status reg-
6
6
0
ister. Channel A information is output during control port reads when CAM is set to 0 (One
Byte Mode)
ister. Channel B information is output during control port reads when CAM is set to 0 (One
Byte Mode)
CCRCM
BSEL
5
5
UNLOCKM
CBMR
4
4
DETCI
VM
3
3
CONFM
2
2
0
BIPM
CAM
1
1
CS8415A
DS470PP3
PARM
CHS
0
0