DSPIC33FJ32MC202-E/MM Microchip Technology, DSPIC33FJ32MC202-E/MM Datasheet - Page 123

• Manufacturer Part Number: DSPIC33FJ32MC202-E/MM
• Description: 16-bit DSC, 32KB Flash,Motor,40 MIPS,nanoWatt 28 QFN-S 6x6mm TUBE
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ32MC202-E/MM

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, Motor Control PWM, QEI, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 6x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 28-QFN
• Package: 28QFN-S EP
• Device Core: dsPIC
• Family Name: dSPIC33
• Maximum Speed: 40 MHz
• Operating Supply Voltage: 3.3 V
• Data Bus Width: 16 Bit
• Number Of Programmable I/os: 21
• Interface Type: I2C/SPI/UART
• On-chip Adc: 6-chx10-bit|6-chx12-bit
• Number Of Timers: 5
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164336 - MODULE SOCKET FOR PM3 28/44QFNDV164033 - KIT START EXPLORER 16 MPLAB ICD2DM240001 - BOARD DEMO PIC24/DSPIC33/PIC32
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

10.6.2.2
In contrast to inputs, the outputs of the peripheral pin
select options are mapped on the basis of the pin. In
this case, a control register associated with a particular
pin dictates the peripheral output to be mapped. The
RPORx registers are used to control output mapping.
Like the RPINRx registers, each register contains sets
of 5-bit fields, with each set associated with one RPn
pin (see
value of the bit field corresponds to one of the periph-
erals, and that peripheral’s output is mapped to the pin
(see
The list of peripherals for output mapping also includes
a null value of 00000 because of the mapping tech-
nique. This permits any given pin to remain uncon-
nected from the output of any of the pin selectable
peripherals.
TABLE 10-2:
© 2011 Microchip Technology Inc.
Table 10-2
SCK1OUT
Function
SS1OUT
Register 10-14
U1RTS
UPDN
SDO1
NULL
U1TX
OC1
OC2
dsPIC33FJ32MC202/204 and dsPIC33FJ16MC304
Output Mapping
and
OUTPUT SELECTION FOR REMAPPABLE PIN (RPn)
Figure
through
10-3).
Register
RPnR<4:0>
00000
00011
00100
00111
01000
01001
10010
10011
11010
10-26). The
RPn tied to default port pin
RPn tied to UART1 Transmit
RPn tied to UART1 Ready To Send
RPn tied to SPI1 Data Output
RPn tied to SPI1 Clock Output
RPn tied to SPI1 Slave Select Output
RPn tied to Output Compare 1
RPn tied to Output Compare 2
RPn tied to QEI direction (UPDN) status
FIGURE 10-3:
U1RTS Output Enable 4
UPDN Output Enable
U1TX Output Enable
OC2 Output Enable
U1RTS Output 4
UPDN Output
U1TX Output
OC2 Output
Default
Default
Output Name
RPnR<4:0>
MULTIPLEXING OF
REMAPPABLE OUTPUT
FOR RPn
19
19
26
26
0
0
3
3
Output Data
Output Enable
DS70283H-page 123
RPn