KSZ8893MQL AM Micrel Inc, KSZ8893MQL AM Datasheet - Page 55

• Manufacturer Part Number: KSZ8893MQL AM
• Description: 2+1 Port 10/100 Switch W/Tranceivers & Frame Buffers, 128-Ld PQFP( )
• Manufacturer: Micrel Inc

Specifications of KSZ8893MQL AM

• Controller Type: Ethernet Switch Controller
• Interface: MII, RMII, SNI
• Voltage - Supply: 3.1 V ~ 3.5 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 128-MQFP, 128-PQFP
• Number Of Primary Switch Ports: 3
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: Yes
• Integrated Led Drivers: Yes
• Power Supply Type: Analog/Digital
• Package Type: PQFP
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Pin Count: 128
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 3.5V
• Operating Supply Voltage (min): 3.1V
• Operating Temperature Classification: Industrial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 576-1603 - EVAL KIT EXPERIMENTAL KSZ8893MQL
• Current - Supply: -
• Lead Free Status / RoHS Status: Compliant, Lead free / RoHS Compliant
• Other names: 576-3091

Near-end (Remote) Loopback
Near-end (Remote) loopback is conducted at either PHY port 1 or PHY port 2.of the KSZ8893MQL/MBL. The
loopback path starts at the PHY port’s receive inputs (RXPx/RXMx), wraps around at the same PHY port’s
PMD/PMA, and ends at the PHY port’s transmit outputs (TXPx/TXMx).
Bit [1] of registers 26 and 42 is used to enable near-end loopback for ports 1 and 2, respectively. Alternatively,
the MII Management register 31, bit [1] can be used to enable near-end loopback.
The near-end loopback paths are illustrated in the following figure.
December 2007
RXP1 /
RXM 1
RXP2 /
RXM2
Figure 13. Near-end (Remote) Loopback Path
PMD/PMA
PMD/PMA
Switch
Port 1
MAC
MAC
PHY
PCS
PCS
Port 2
PHY
55
TXP2 /
TXM2
TXP1 /
TXM 1
M9999-121007-1.5