KSZ8893MQL AM Micrel Inc, KSZ8893MQL AM Datasheet - Page 69

• Manufacturer Part Number: KSZ8893MQL AM
• Description: 2+1 Port 10/100 Switch W/Tranceivers & Frame Buffers, 128-Ld PQFP( )
• Manufacturer: Micrel Inc

Specifications of KSZ8893MQL AM

• Controller Type: Ethernet Switch Controller
• Interface: MII, RMII, SNI
• Voltage - Supply: 3.1 V ~ 3.5 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 128-MQFP, 128-PQFP
• Number Of Primary Switch Ports: 3
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: Yes
• Integrated Led Drivers: Yes
• Power Supply Type: Analog/Digital
• Package Type: PQFP
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Pin Count: 128
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 3.5V
• Operating Supply Voltage (min): 3.1V
• Operating Temperature Classification: Industrial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 576-1603 - EVAL KIT EXPERIMENTAL KSZ8893MQL
• Current - Supply: -
• Lead Free Status / RoHS Status: Compliant, Lead free / RoHS Compliant
• Other names: 576-3091

assignments are the same for all ports, but the address for each port is different, as indicated.
Register 16 (0x10): Port 1 Control 0
Register 32 (0x20): Port 2 Control 0
Register 48 (0x30): Port 3 Control 0
Bit
7
6
5
4-3
2
1
0
December 2007
Name
Broadcast
Storm
Protection
Enable
DiffServ
Priority
Classification
Enable
802.1p Priority
Classification
Enable
Port-based
Priority
Classification
Tag Insertion
Tag Removal
TX Multiple
Queues Select
Enable
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Description
= 1, enable broadcast storm protection for
ingress packets on port
= 0, disable broadcast storm protection
= 1, enable DiffServ priority classification for
ingress packets (IPv4 and IPv6) on port
= 0, disable DiffServ function
= 1, enable 802.1p priority classification for
ingress packets on port
= 0, disable 802.1p
= 00, ingress packets on port will be
classified as priority 0 queue if “Diffserv” or
“802.1p” classification is not enabled or fails to
classify.
= 01, ingress packets on port will be
classified as priority 1 queue if “Diffserv” or
“802.1p” classification is not enabled or fails to
classify.
= 10, ingress packets on port will be
classified as priority 2 queue if “Diffserv” or
“802.1p” classification is not enabled or fails to
classify.
= 11, ingress packets on port will be
classified as priority 3 queue if “Diffserv” or
“802.1p” classification is not enabled or fails to
classify.
Note: “DiffServ”, “802.1p” and port priority can
be enabled at the same time. The OR’ed result of
802.1p and DSCP overwrites the port priority.
= 1, when packets are output on the port, the
switch will add 802.1p/q tags to packets without
802.1p/q tags when received. The switch will not
add tags to packets already tagged. The tag
inserted is the ingress port’s “port VID”.
= 0, disable tag insertion
= 1, when packets are output on the port, the
switch will remove 802.1p/q tags from packets
with 802.1p/q tags when received. The switch will
not modify packets received without tags.
= 0, disable tag removal
= 1, the port output queue is split into four priority
queues.
= 0, single output queue on the port. There is no
priority differentiation even though packets are
classified into high or low priority.
69
Default
0
0
0
00
0
0
0
M9999-121007-1.5