1367337-1 TE Connectivity, 1367337-1 Datasheet - Page 2

• Manufacturer Part Number: 1367337-1
• Description: CONN RCPT 70POS RTANG .8MM SMD
• Manufacturer: TE Connectivity

Specifications of 1367337-1

• Connector Style: Receptacle
• Connector Type: PT
• Number Of Positions: 70
• Mounting Type: Surface Mount, Right Angle
• Termination: Solder
• Features: Board Guide
• Contact Finish: Gold
• Contact Finish Thickness: 15µin (0.38µm)
• Gender: Receptacle
• No. Of Contacts: 70
• Contact Termination: Surface Mount Horizontal
• Connector Mounting: PCB
• Contact Plating: Gold
• Contact Material: Phosphor Bronze
• Rohs Compliant: Yes
• Product Type: Connector
• Termination Type: Surface Mount
• Pcb Mount: Double Sided (Belly-to-Belly)
• Contact Plating, Mating Area, Material: Gold (15)
• Contact Base Material: Phosphor Bronze
• Housing Color: Black
• Ul Flammability Rating: UL 94V-0
• Housing Material: Liquid Crystal Polymer (LCP)
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Reflow solder capable to 245°C, Reflow solder capable to 260°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Application: X2, XENPAK, XPAK
• Packaging Method: Reel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: A100858DKR

3.3.
3.4.
3.5.
Rev C
Initial examination of product.
Final examination of product.
Dry circuit resistance.
Dielectric withstanding voltage.
Vibration, random.
Mechanical shock, specified pulse.
Ratings
!
!
!
!
!
!
Performance and Test Description
Product is designed to meet the electrical, mechanical and environmental performance requirements
specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental
conditions per EIA 364.
Test Requirements and Procedures Summary
Test Description
Voltage: 120 volts AC
Current: Signal application only, 0.5 ampere maximum per individual contact
Temperature: -55 to 85° C
Inductance: 3.5 nH maximum
Capacitance: 1.1 pF maximum
Differential Impedance: 100 ohms
Meets requirements of product
drawing.
Meets visual requirements.
35 milliohms maximum.
300 volts AC minimum.
1 minute hold with no breakdown or
flashover.
No discontinuities of 1 microsecond
or longer duration.
See Note.
No discontinuities of 1 microsecond
or longer duration.
See Note.
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirement
EIA-364.
Visual and dimensional inspection
(C of C) per product drawing.
EIA-364.
Visual inspection.
EIA-364-23.
Subject mated specimens to 100
milliamperes maximum and 20
millivolts maximum open circuit
voltage.
EIA-364-20.
Test between SFP contacts 12/13
and 18/19 of unmated specimens.
EIA RS-364-28, Condition VII, Level
D.
Subject mated specimens to 3.10
G's rms between 20-500 Hz. 15
minutes in each of 3 mutually
perpendicular planes.
EIA-364-27, Condition A.
Subject mated specimens to 30 G's
half-sine shock pulses of 11
milliseconds duration. 3 shocks in
each direction applied along 3
mutually perpendicular planes, 18
total shocks.
Procedure
108-1949
2 of 5