1367337-1 TE Connectivity, 1367337-1 Datasheet - Page 5

• Manufacturer Part Number: 1367337-1
• Description: CONN RCPT 70POS RTANG .8MM SMD
• Manufacturer: TE Connectivity

Specifications of 1367337-1

• Connector Style: Receptacle
• Connector Type: PT
• Number Of Positions: 70
• Mounting Type: Surface Mount, Right Angle
• Termination: Solder
• Features: Board Guide
• Contact Finish: Gold
• Contact Finish Thickness: 15µin (0.38µm)
• Gender: Receptacle
• No. Of Contacts: 70
• Contact Termination: Surface Mount Horizontal
• Connector Mounting: PCB
• Contact Plating: Gold
• Contact Material: Phosphor Bronze
• Rohs Compliant: Yes
• Product Type: Connector
• Termination Type: Surface Mount
• Pcb Mount: Double Sided (Belly-to-Belly)
• Contact Plating, Mating Area, Material: Gold (15)
• Contact Base Material: Phosphor Bronze
• Housing Color: Black
• Ul Flammability Rating: UL 94V-0
• Housing Material: Liquid Crystal Polymer (LCP)
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Reflow solder capable to 245°C, Reflow solder capable to 260°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Application: X2, XENPAK, XPAK
• Packaging Method: Reel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: A100858DKR

4.
4.1.
4.2.
4.3.
4.4.
Rev C
QUALITY ASSURANCE PROVISIONS
Qualification Testing
A.
B.
Requalification Testing
If changes significantly affecting form, fit or function are made to the product or manufacturing process,
product assurance shall coordinate requalification testing, consisting of all or part of the original testing
sequence as determined by development/product, quality and reliability engineering.
Acceptance
Acceptance is based on verification that the product meets the requirements of Figure 1. Failures
attributed to equipment, test setup or operator deficiencies shall not disqualify the product. If product
failure occurs, corrective action shall be taken and specimens resubmitted for qualification. Testing to
confirm corrective action is required before resubmittal.
Quality Conformance Inspection
The applicable quality inspection plan shall specify the sampling acceptable quality level to be used.
Dimensional and functional requirements shall be in accordance with the applicable product drawing
and this specification.
Specimen Selection
Specimens shall be prepared in accordance with applicable Instruction Sheets and shall be
selected at random from current production. All test groups shall each consist of 5 lower cages, 5
upper cages and 5 connectors.
Test Sequence
Qualification inspection shall be verified by testing specimens as specified in Figure 2.
108-1949
5 of 5