MTCBA-C1-EN2-N3-NAM Multi-Tech Systems, MTCBA-C1-EN2-N3-NAM Datasheet - Page 75

• Manufacturer Part Number: MTCBA-C1-EN2-N3-NAM
• Description: ROUTER WIRELESS DUAL CDMA
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® rCellr

Specifications of MTCBA-C1-EN2-N3-NAM

• Function: Transceiver, CDMA, Router
• Modulation Or Protocol: CDMA2000
• Frequency: 800MHz, 1.9GHz
• Applications: Verizon™ Networks (USA)
• Interface: RJ-45, RS-232
• Features: US Power Cord
• Voltage - Supply: 9 V ~ 32 V
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1067

New Message Indication +CNMI
Description:
Syntax:
Values
Multi-Tech Systems, Inc. CDMA C1 AT Commands Reference Guide (PN S000478C)
This command selects the procedure for message reception from the network.
Broadcast messages and Status Report messages are not stored.
Command syntax: AT+CNMI=<mode>,<mt>,<bm>,<ds>,<bfr>
<mode>
<mt>
<bm>
<ds>
<bfr>
Command
AT+CNMI=2,1,0,0,0
Note: <mt>=1
AT+CNMI=2,2,0,0,0
Note: <mt>=2
AT+CNMI=2,0,0,1,0
Note: <ds>=1
AT+CMGS=”8585551212”<CR>
Message to send <ctrl-Z>
Note: Send a message in text mode
2
0
1
2 or 3 SMS-DELIVERs (except class 2 messages) are routed using unsolicited code:
0
2 or 3 New CBMs are routed directly to the TE using unsolicited result code (format
0
1
0
1
The <mode> value controls the processing of unsolicited result codes. Only mode 2
is supported at this time.
Buffer unsolicited result codes in the TA when TA-TE link is reserved and flush them
to the TE after reservation. Otherwise forward the messages directly to the TE
without storing.
Sets the result code indication routing for SMS-DELIVERs. Default is 1.
No SMS-DELIVER indications are routed.
SMS-DELIVERs are routed using unsolicited code: +CMTI: “MT”, <index>
+CMT: <oa>, <scts>, <tooa>, <lang>, <encod>,
<priority>[,<cbn>],<length><CR><LF><data> (text mode)
Sets the result code indication routing for received Cell Broadcast Messages. Default
is 0.
No CBM indications are routed to the TE. The CBMs are not stored.
matches that of +CBM: <oa>, [<alpha>,] <scts> [,<tooa>, <length>]
<CR><LF><data> (text mode)
Sets the routing for SMS-STATUS-REPORTs. Default is 0.
No SMS-STATUS-REPORTs are routed.
SMS-STATUS-REPORTs are routed using unsolicited code: +CDS: <fo>, <mr>,
[<ra>] , [<tora>], <scts>, <dt>, <st> (Text mode)
Since <mode> cannot be changed, this parameter is no longer used, but these
values are still accepted for legacy purposes. Default is 0.
TA buffer of unsolicited result codes defined within this command is flushed to the TE
when <mode> 1…3 is entered (OK response shall be given before flushing the
codes)
TA buffer of unsolicited result codes defined within this command is cleared when
<mode> 1…3 is entered.
Chapter 14 – Short Message Service Control Commands
Possible Responses
OK
AT+CMTI : “MT”,1
Note: message received
OK
+CMT : “8585551212”,”98/10/01,12 :30 00”,
129,1,2,0,5<CR><LF>
Hello
Note: message received
OK
+CMGS : 7
OK
Note: Successful transmission
+CDS : 2, 116, ”8585551212”, 129, “98/10/01,12 :30
:07”, “98/10/01 12 :30 :08”, 32768
Note: message was correctly delivered
Note:
Cell
75