CYII4SE6600AB-QFCH Cypress Semiconductor Corp, CYII4SE6600AB-QFCH Datasheet - Page 15

• Manufacturer Part Number: CYII4SE6600AB-QFCH
• Description: IMAGE SENSOR 6.6 MP CMOS
• Manufacturer: Cypress Semiconductor Corp
• Type: CMOS Imagingr

Specifications of CYII4SE6600AB-QFCH

• Pixel Size: 3.5µm x 3.5µm
• Active Pixel Array: 2210H x 3002V
• Frames Per Second: 5
• Voltage - Supply: 2.5V, 3.3V
• Package / Case: 68-LCC, 68-PLCC
• Package: 68CLCC
• Image Size: 2210x3002 Pixels
• Color Sensing: Color
• Operating Temperature: -30 to 65 °C
• Operating Supply Voltage: 2.5 to 3.3 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Electronic Shutter
An electronic shutter similar to a rolling curtain is implemented on-chip. As shown in
shift register points to the row that is currently being read out. The other shift register points to the row that is currently being reset.
Both pointers are shifted by the same Y-clock and move over the focal plane. The integration time is set by the delay between both
pointers.
In case of a mechanical shutter, the two shift registers can be combined to simultaneously apply the pulses from both sides of the
pixel array. This is to halve the influence of the parasitic RC times of the reset and select lines in the pixel array. This can result in a
reduction of the row blanking time. This is the case when FAST_RESET in the SEQUENCER register is set to 1, or in the
nondestructive readout modes 1 and 2.
Document Number: 001-02366 Rev. *G
Line number
Readout
pointer
Figure 17. Electronic Rolling Shutter Operation
Frame time
Figure 16. Electronic Shutter
Reset sequence
IBIS4-6600 CYII4SM6600AB
Figure
Reset
pointer
Integration time
Time axis
17, there are two Y shift registers. One
Page 15 of 34
[+] Feedback