4010A B&K Precision, 4010A Datasheet - Page 8
4010A
Manufacturer Part Number
4010A
Description
FUNCTION GENERATOR 2MHZ
Manufacturer
B&K Precision
Type
Functionr
Specifications of 4010A
Includes
Cable
Frequency Band
0.2Hz ~ 2MHz (7 Ranges)
Display Type
No Display
Supply Voltage
120V/230V
Signal Types
Sine, Square, Triangle, Ramp, Pulse
Frequency
0.2 Hz to 2 MHz
Equipment Type
Function Generators
Bandwidth
2MHz
Modulation Type
FM
External Height
114mm
External Width
298mm
External Depth
264mm
Leaded Process Compatible
No
Peak Reflow Compatible (260 C)
No
Rohs Compliant
No
Signal Generator Type
Function
Number Of Channels
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
BK4010A
FRONT PANEL (Refer to Fig. 1)
1. POWER Switch. Turns power on and off.
2. RANGE Switch. Selects output frequency range. Seven
3. FUNCTION Switch. Selects sine, square, or triangle
4. OUTPUT LEVEL Control. Controls the amplitude of
5. DC OFFSET Control. Enabled by the DC OFFSET
6. OUTPUT Jack. Waveform selected by FUNCTION
7. TTL/CMOS Jack. TTL or CMOS square wave,
ranges from 2 Hz to 2 MHz. Switch indicates maximum
frequency of range and is adjusted with FREQUENCY
control to 0.1 times the maximum. For example, if the
200 kHz range is selected, the output frequency can be
adjusted from 20 kHz to 200 kHz.
waveform at OUTPUT jack.
the signal at the OUTPUT jack. Output level can be
decreased by approximately 20 dB with this control.
Switch (12). Clockwise rotation from center changes the
DC offset in a positive direction while counterclockwise
rotation from center changes the DC offset in a negative
direction.
switch as well as the superimposed DC OFFSET voltage
is available at this jack.
depending on the position of the CMOS LEVEL switch
(13) is output at this jack. This output is independent of
the OUTPUT LEVEL and DC OFFSET controls.
CONTROLS AND INDICATORS
8
8. CMOS LEVEL Control. Rotating this control
9. VCG Jack. Voltage Controlled Generator input.
10. DUTY CYCLE Control. Enabled by the DUTY
11. -20 dB Switch. When engaged, the signal at the
12. DC OFFSET Switch. When engaged, enables
13. CMOS LEVEL Switch. When engaged, changes
14. DUTY CYCLE Switch. When engaged, enables
15. FREQUENCY Control. Adjustment of the output
16. INV. Allows the user to invert the polarity of the
clockwise increases the amplitude of the CMOS
square wave at the TTL/CMOS jack.
Permits external control of generator output
frequency by a DC voltage input at this jack. A
positive voltage will decrease frequency.
CYCLE Switch (14). Rotation from center position
adjusts the duty cycle of the main OUTPUT signal.
OUTPUT jack is attenuated by 20 dB.
operation of the DC OFFSET control (5).
the TTL signal to CMOS signal at the TTL/CMOS
jack.
operation of DUTY CYCLE control (10).
frequency from 0.1 to 1 times the selected range.
normal output signal.