8808A 120V Fluke Electronics, 8808A 120V Datasheet - Page 12

• Manufacturer Part Number: 8808A 120V
• Description: DMM 5.5 RES RS-232 INTERFACE
• Manufacturer: Fluke Electronics
• Type: Digital (DMM)r

Specifications of 8808A 120V

• Includes: Test Leads
• Style: Bench
• Display Digits: 5.5
• Display Type: VFD, Dual
• Display Count: 200000
• Function: Voltage, Current, Resistance, Frequency
• Functions, Extra: Continuity, dB, Diode Test
• Features: Hold, Min/Max, RS-232 Port
• Ranging: Auto/Manual
• Response: True RMS
• Lead Free Status / RoHS Status: Not applicable / RoHS non-compliant
• Other names: 614-1068

8808A
Getting Started Manual
6
Current-Input Fuses
The 200 mA and 10 A inputs are protected by user-replaceable fuses.
To test the current-input fuses:
For protection against fire or arc flash, replace a blown fuse
with a fuse of an identical rating.
1. Turn on the Meter and plug a test lead into the INPUT VZYR HI terminal.
2. Press O.
3. Press Vto set the range to 200 . Only the 200 , 2 k , and 20 k ranges can
4. Insert the other end of the test lead into the mA terminal. If the fuse is good, the
5. Remove the test lead from the mA terminal and insert it into the 10 A terminal.
Line Voltage Selection
The 200 mA input is protected by a fuse rated at 440 mA, 1000 V (fast blow),
10,000 A minimum breaking capacity.
The 10 A input is protected by a fuse rated at 11 A, 1000 V (fast blow), 10,000 A
minimum breaking capacity.
be used to test the mA input fuse.
Meter displays a reading of 0.000 M . If the fuse is blown, the Meter displays 0L
to indicate an overload.
If the fuse is good, the Meter displays a reading of <1.000 . If the fuse is blown,
the Meter displays 0L to indicate an overload.
100 / 120
220 / 240
Figure 1. Replacing the Line-Power Fuse
Table 3. Line Voltage to Fuse Rating
XW Warning
0.125 A, 250 V (slow blow)
0.063 A, 250 V (slow blow)
Fuse Rating
eue20.eps