TPI 296 TPI (Test Products Int), TPI 296 Datasheet - Page 16
![DMM CLAMP W/RECORD 4 DIGIT+BAR](/photos/27/4/270465/tpi_296_sml.jpg)
TPI 296
Manufacturer Part Number
TPI 296
Description
DMM CLAMP W/RECORD 4 DIGIT+BAR
Manufacturer
TPI (Test Products Int)
Series
296r
Type
Digital (DMM)r
Datasheet
1.TPI_296.pdf
(32 pages)
Specifications of TPI 296
Includes
Battery, Case, Test Leads
Style
Clamp
Display Digits
3.75
Display Type
LCD, Bar Graph
Display Count
4000
Function
Voltage, Current, Resistance, Frequency
Functions, Extra
Continuity, Diode Test
Features
Auto Off, Hold, Sleep
Ranging
Auto/Manual
Response
True RMS
Other names
290-1296
296
296
16
• Disconnect power from the block and move
black lead to the neutral side of the block.
Reconnect power to the block and read the
voltage on the meter. The reading should be
approximately 110V to 130V.
the red wire to ground. Reconnect power to
the block and read the voltage on the meter.
Typically less than 20V should exist from
neutral to ground. If 110V or above exists,
the block may be wired incorrectly.
the block and turn it off.
Set up the meter following the
steps under “Measurement
the hot side of the block and the
Procedure” on page 17. Then
• Connect the red test lead to
proceed with the following:
Application Notes
Disconnect power from the
terminal block, find the fuse or
circuit breaker that controls