TPI 296 TPI (Test Products Int), TPI 296 Datasheet - Page 25
![DMM CLAMP W/RECORD 4 DIGIT+BAR](/photos/27/4/270465/tpi_296_sml.jpg)
TPI 296
Manufacturer Part Number
TPI 296
Description
DMM CLAMP W/RECORD 4 DIGIT+BAR
Manufacturer
TPI (Test Products Int)
Series
296r
Type
Digital (DMM)r
Datasheet
1.TPI_296.pdf
(32 pages)
Specifications of TPI 296
Includes
Battery, Case, Test Leads
Style
Clamp
Display Digits
3.75
Display Type
LCD, Bar Graph
Display Count
4000
Function
Voltage, Current, Resistance, Frequency
Functions, Extra
Continuity, Diode Test
Features
Auto Off, Hold, Sleep
Ranging
Auto/Manual
Response
True RMS
Other names
290-1296
296
296
g. Measuring Diodes
Instrument set-up:
FUNC.
Measurement Procedure:
1. Disconnect power to circuit to be measured.
2. Plug the black test lead into COM input jack.
3. Plug red test lead into the V/ input jack.
4. Set the rotary switch to the
5. Connect the black test lead to the banded end of
6. Reading on the display should be between 0.5 and
7. Reverse test lead connections in 5 above.
8. Reading on the display should be OFL (Overload).
CAUTION!
Do not attempt to make diode measurements with
circuit energized. The only way to accurately test a
diode is to remove it completely from the circuit before
attempting to measure it.
the diode and the red test lead to the non-banded
end of the diode.
0.8 volts.
NOTE: If diode reads 0 in both directions, diode is
shorted. If diode reads OFL in both directions, diode
is open.
BLACK
TEST LEAD TEST LEAD
COM
RED
V/Ω
MIN
READING
0.001V
function.
MAX
READING
2.000V
25