AS6M-2Y2 IDEC, AS6M-2Y2 Datasheet - Page 31

• Manufacturer Part Number: AS6M-2Y2
• Description: Switch
• Manufacturer: IDEC

Short 22-mm-long body miniature control unit series with LED illumination face
and snap-action switching.
• Bright and clear LED illumination.
• 10-mm mounting holes
• All series have terminals on the same plane.
• UL recognized, CSA certified
LED Lamp Ratings (LAD-S Type)
Note: When LED lamps are used on voltages other than the above, external resistor value R is determined by the following formula:
• LED lamps do not have a current-limiting resistor, and external resistors of recommended values for each voltage
Contact Ratings (Contact Block)
• Minimum applicable load: 5V AC/DC, 3 mA
Weight
(06/11/10)
Type No.
Lamp Base
Forward Current (If)
Forward Voltage (Vf) (nominal)
Reverse Voltage (Vr)
Illumination Color
LED Lamp Color
Applicable Lens Color
Base Plastic Color
LED Lamp Life (reference value) Approx. 50,000 hours (The illuminance reduces to 50% the initial intensity when used on complete DC.)
Operating Voltage & External
Current-limiting Resistor
(recommended value)
(Note)
Internal Circuit
Rated Insulation Voltage
Rated Thermal Current
Operating Voltage (AC/DC)
AC 50/60 Hz
DC
Contact Material
Weight (approx.)
must be provided. Connect a current-limiting resistor in series, otherwise LED lamps will be damaged. Because
no protection diode is contained, ensure the correct polarity is observed.
(applicable range may vary with operating conditions and load types)
ø10
R = (operating voltage – Vf) / If
Resistive Load
Inductive Load
Resistive Load
Inductive Load
A1
AL1M-M11: 3g
AL1M-P1:
AB1M-M1: 3g
Series
3g
5V DC:
6V DC:
12V DC: 510Ω, 1W
24V DC: 1.1 kΩ, 1W
250V
3A
Silver
1.0A
0.7A
24V
Amber Clear
–
–
150Ω, 1/2W
200Ω, 1/2W
LAD-SA
Amber
2.2V
Miniature Control Units
A
110V
1.0A
0.7A
0.2A
0.1A
220V
0.5A
0.5A
–
–
Yellow Diffused
LAD-SG
Green
2.1V
Exclusive for A series control units
G
Specifications
Operating Temperature
Operating Humidity
Contact Resistance
Insulation Resistance
Dielectric
Strength
Vibration Resistance
Shock Resistance
Mechanical Durability
(minimum operations)
Electrical Durability
(minimum operations)
Degree of Protection
(+)
20 mA
Red
4V
Switch Unit
Illumination
Unit
Red Clear
(–)
LAD-SR
1.7V
Red
45 to 85% RH (no condensation)
50 mΩ maximum (initial value)
100 MΩ minimum (500V DC megger)
Between live and dead metal parts:
Between terminals of different poles:
Between terminals of the same pole:
Between contact and lamp terminals:
Between live part and ground:
2,000V AC, 1 minute
Operating extremes:
5 to 55 Hz, amplitude 0.75 mm
Damage limits:
Operating extremes: 200 m/s
Momentary: 200,000 operations
Maintained: 100,000 operations
Momentary: 100,000 operations
Maintained:
(Switching frequency 1200 operations/h)
–25 to +55°C (no freezing)
Enclosed (IP40)
R
2,000V AC, 1 minute
2,000V AC, 1 minute
1,000V AC, 1 minute
1,500V AC, 1 minute
(+)
50,000 operations
Current
Limiting
Resistor
500 m/s
Lamp
Terminal (+)
Yellow and White
Yellow Clear
LAD-SY
2
2
2.2V
(50G)
(20G)
Y
Lamp
Terminal (–)
(–)
31