NS15-KBA04 Omron, NS15-KBA04 Datasheet - Page 129

• Manufacturer Part Number: NS15-KBA04
• Description: Anti-Glare Covr Sheet For NS15
• Manufacturer: Omron

Specifications of NS15-KBA04

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Setting the Front Panel Switches
•
Set DIP switch pin 4 or 5 of the CPU Unit according to the port to which the PT is connected,
as shown below. (The following figure shows a CJ1G CPU Unit. The arrangement depends
on the CPU Unit, but the DIP switch settings are the same.)
Using RS-232C
RS-232C port
Connected to a Programming Console or
other device.
DIP switch (inside battery compartment)
Turn ON pin 4 when connecting the PT to the
peripheral port (to use the communications
settings in the PLC Setup).
Turn ON pin 5 when connecting the PT to the
RS-232C port (to use the communications
settings in the PLC Setup).
Peripheral port
Connected to a Programming Console or other
device.
4-2 1:N Host Connection
4-13