CJ1W-V680C12 Omron, CJ1W-V680C12 Datasheet - Page 16

• Manufacturer Part Number: CJ1W-V680C12
• Description: CJ1 2-Head V680 RFID Module
• Manufacturer: Omron

Specifications of CJ1W-V680C12

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Controller
Note: For details, refer to the User's Manual (Cat. No. Z249).
■ USB Port
The USB port is used for a simple connection with a personal computer using a USB cable. The port complies with USB 1.1, and the USB cable
uses a series A or series mini-B connector. A USB port driver must be separately provided. Consult with your OMRON representative for details.
When connected to a host device via USB, the communications will use 1:1 protocol regardless of the setting of DIP switches 3 to 9.
The USB port is not used for control purposes. When building a system, be sure to provide an RS-232C port or RS-422/RS-485C port.
ID Sensor Units
Note: When connected to the V680-H01: 280 mA
16
Item
Power supply voltage
(Power consumption)
Communications Specifications
Input Specifications (Input voltage)
RST, TRG1, and TRG2
Output Specifications (Maximum switching capacity)
RUN, BUSY/OUTS, ERROR/OUT4, OUT1, and OUT2
Ambient operating temperature
Ambient storage temperature
Ambient operating humidity
Insulation resistance
Dielectric strength
Degree of protection
Vibration resistance
Shock resistance
Appearance
Material
Weight
Connectable Amplifier Units
Item
Current
consumption
Ambient operating
temperature
Ambient storage temperature
Ambient operating humidity
Insulation resistance
Dielectric strength
Degree of protection
Vibration resistance
Shock resistance
Appearance
V680 Series
Internal: 5 V
Internal:
24 V/26 V
External: 24 V
Model
260 mA
130 mA (See note.)
---
0 to 55 C
10% to 90% (with no condensation)
20 m
1,000 VAC for 1 minute
Mounted in panel (IP30)
10 to 57 Hz variable vibration, 0.075-mm double amplitude and 57 to 150 Hz variable vibration at 9.8 m/s
acceleration, with 10 sweeps in X, Y, and Z directions for 8 minutes each
147 m/s
31
20 to 75 C
RFID System
CJ1W-V680C11
65
min. at 500 VDC
2
Model
in X, Y, and Z directions 3 times each
90 mm (excluding protrusions)
24 VDC ( 15% to +10%)
15 W max., 0.8 A max.
RS-232C, RS-422, RS-485
24 VDC (+10% to 15%, including ripple) (PNP and NPN compatible)
24 VDC (+10% to 15%, including ripple)
100-mA photoMOS output (PNP and NPN compatible)
25% to 85% (with no condensation)
20 M
(1) Between power supply terminals and grounded case
(2) Between ground and terminals
1,000 VAC (50/60 Hz) for 1 minute
(1) Between power supply terminals and grounded case
(2) Between ground and terminals
Panel mounted (equivalent to IP20)
10 to 150 Hz variable vibration, 0.2-mm double amplitude at 15 m/s
sweeps in X, Y, and Z directions for 8 minutes each
150 m/s
105
Polycarbonate (PC) resin, ABS resin
Approx. 300 g
1
10 to 55 C (with no icing)
25 to 65 C (with no icing)
90
min. (at 500 VDC) applied as follows:
2
320 mA
260 mA
---
65 mm (not including projections)
V680-CA5D01-V2
CJ1W-V680C12
260 mA
125 mA (See note.)
---
35
CS1W-V680C11
130
2
101 mm (excluding protrusions)
V680-CA5D02-V2
320 mA
---
360 mA
2
acceleration, with 10
CS1W-V680C12
2