CJ1W-V680C12 Omron, CJ1W-V680C12 Datasheet - Page 17

no-image

CJ1W-V680C12

Manufacturer Part Number
CJ1W-V680C12
Description
CJ1 2-Head V680 RFID Module
Manufacturer
Omron
Datasheet

Specifications of CJ1W-V680C12

Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Functional Specifications of ID Sensor Units
Note 1. Cannot be used for communications with the V680-D1KP@@.
Handheld Reader Writers
Note 1. Refer to the User's Manual (Cat. No. Z272) for details.
AC Adapter (for V680-CH1D)
Item
Communications control
protocol
Number of Read/Write Head
connections
Commands
Data transfer quantity
Diagnostic function
Monitoring/testing
functions
Number of allocated words 10 words
Item
Power supply voltage
Current consumption
Communications
specifications
Ambient operating
temperature during
communication
Ambient storage
temperature
Ambient operating humidity
during communication
Insulation resistance
Dielectric strength
Degree of protection
Vibration resistance
Shock resistance
Weight
Cable length
Input voltage
Input current
Output voltage
Ambient operating
temperature
Ambient storage
temperature
Ambient operating
humidity
Insulation resistance 100 M
Dielectric strength
Weight
Applicable standards UL/CSA
Item
2. For details, refer to the User's Manual (Cat. No. Z271).
2. This does not include the connector section. The main unit is not resistant to chemical or oils.
Model
Model
Model
100 to 120 VAC at 50/60 Hz
100 VAC: 200 mA ±20%, 120 VAC: 170 mA ±20%
5 VDC ±0.25 V
0 to 40 C (with no icing)
25% to 85% (with no condensation)
1,500 V for 1 minute between input terminals and output terminals with a current leakage of 5 mA max.
Approx. 85 g
40 to 70 C (with no icing)
Special protocol for CS1 and CJ1 PLCs
1
Supported commands: Read, Write, Bit Set/Bit Clear, Mask Bit Write, Calculation Write, Data Fill, Data Check,
Number of Writes Control, Copy, Read with Error Correction/Write with Error Correction, UID Read, and Noise
Measurement.
The following communications options are supported: Single trigger, Single auto, Repeat auto, FIFO trigger, FIFO
repeat (See note.), Multi-access trigger, and Multi-access repeat (See note.)
2,048 bytes max. (160 bytes/scan)
(1) CPU watchdog timer
(2) Communications error detection with ID Tag
(3) Antenna power supply error
Tag communications can be tested in Test Mode. Status is displayed by LED indicators.
5 VDC±5%
500 mA max. (for a power supply voltage of 5.0 V)
USB (Series A plug) Ver.1.1
0 to +40 C
35% to 85% (with no condensation)
50 M
1,000 VAC, 50/60 Hz for 1 min (leakage current: 1 mA max.) between connectors and case
IEC 60529: IP63 (See note 2.)
Destruction: 10 to 150 Hz, 0.2-mm double amplitude, with 10 sweeps for 8 min each in 6 directions
Destruction: 150 m/s
Approx. 110 g
(including connector and
cable)
0.8 m
min. (at 500 VDC) between input terminals and output terminals
25 to +65 C
V680-CHUD 0.8M
CJ1W-V680C11
min. (at 500 VDC) between connector and case
2
, 3 times each in X, Y, and Z directions
2
20 words
Approx. 140 g
(including connector and
cable)
1.9 m
V680-CHUD 1.9M
CJ1W-V680C12
V600-A22
1
10 words
RS-232C (D-SUB 9-pin)
(compatible with IBM
PC/AT)
Approx. 170 g
(including connector and
cable)
2.5 m
V680 Series
CS1W-V680C11
V680-CH1D
RFID System
2
20 words
RS-232C (D-SUB 9-pin)
Approx. 120 g
(including connector and
cable)
0.8 m
CS1W-V680C12
V680-CH1D-PSI
17

Related parts for CJ1W-V680C12