CRS1-RPT01 Omron, CRS1-RPT01 Datasheet - Page 87

• Manufacturer Part Number: CRS1-RPT01
• Description: Repeater Unit
• Manufacturer: Omron

Specifications of CRS1-RPT01

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

■ Pressure-welding a Loose-wire Cable to a MIL Connector
To prepare a connecting cable by pressure-welding a loose-wire cable to a MIL connector, assemble the connector from the components
shown in the following table.
Note: Two Semi-covers are required per connector.
For details on individual components, refer to the Connectors Group Catalog (Cat. No. G015).
Connecting to Screw-less Clamp Terminal Blocks
For Slave Units with screw-less clamp terminal blocks, the terminal blocks can be easily wired by inserting pin terminals. Follow the pro-
cedure below to connect the external device cable to a screw-less clamp terminal block.
■ Applicable Pin Terminals
When wiring an external device cable to a screw-less clamp terminal block, special pin terminals must be placed on the cable wires. The
applicable pin terminals are listed in the following table.
The pin terminal conductor should be about 8 to 10 mm in length.
• 10-pin Cable
Socket
Semi-cover (See note.)
• 16-pin Cable
Socket
Semi-cover (See note.)
• 20-pin Cable
Socket
Semi-cover (See note.)
Hood Cover
• 40-pin Cable
Socket
Semi-cover (See note.)
Hood Cover
H0.5/14 orange
H0.75/14 white
H1.5/14 red
Name
No polarity guide
Uses polarity guide
Component
Component
Component
Component
Conductor length: 8 to 10 mm
0.5 mm
0.75 mm
1.5 mm
Applicable wire size
2
2
/AWG20
/AWG16
2
/AWG18
XG5M-1632-N
XG5S-0801
XG5M-2032-N
XG5S-1001
XG5S-2012
XG5M-4032-N
XG5S-2001
XG5S-4022
XG5M-1031-N
XG5M-1032-N
XG5S-0501
Wire size: AWG24
Wire size: AWG24
Wire size: AWG24
Wire size: AWG24
PZ6 roto
Crimp tool
XG5M-1635-N
XG5M-2035-N
XG5M-4035-N
Weidmuller Co. Ltd.
XG5M-1034-N
XG5M-1035-N
Manufacturer
AWG28 to AWG26
AWG28 to AWG26
AWG28 to AWG26
AWG28 to AWG26
Wire size:
Wire size:
Wire size:
Wire size:
Appendix
87