NSH5-232UL-3M Omron, NSH5-232UL-3M Datasheet - Page 77

• Manufacturer Part Number: NSH5-232UL-3M
• Description: 3m RS232 Cable For NSH5
• Manufacturer: Omron

Specifications of NSH5-232UL-3M

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Removing from a DIN
Track
Mounting to a Panel
4-5
Precautions Prior to
Wiring
Connection Method
Connection Method
Note
Remove the End Plates, and then insert a screwdriver in the hooks on the
base of the Removable Box and pull down.
Referring to the dimensions in the following diagram, cut three holes in a
panel with a minimum thickness of 2 mm. Secure the Removable Box to the
panel with screws using the screw (4M
able Box.
To ensure that the Removable Box is mounted securely, use a panel with a
thickness of at least 2 mm.
The Removable Box is connected between the NSH5 PT and a PLC.
Check the following items prior to wiring.
Mounting holes.
• Signal Lines
• NSH5 Special Cable Connector
• Hard-wired Terminal Block
• RS-422A Terminal Block
• NSH5 Unit Number Setting
Make sure that the PLC's I/O are correct.
Make sure that the NSH5 Special Cable connector screws and the
Removable Box are securely locked.
The hard-wired terminal block is removable. Make sure it is securely con-
nected and that all screws are tight.
Make sure that all I/O lines between the PLC and the Removable Box are
correct.
When using more than one NSH5 PT, make sure in advance that no unit
numbers are used more than once. If duplicate numbers exist, a commu-
nications error will occur.
Recommended mounting dimensions
3-M
×
86±0.3
14) mounting holes on the Remov-
Section 4-5
55