R0K5562T0S000BE Renesas Electronics America, R0K5562T0S000BE Datasheet - Page 15

• Manufacturer Part Number: R0K5562T0S000BE
• Description: KIT STARTER FOR RX62T
• Manufacturer: Renesas Electronics America
• Series: Renesas Starter Kits (RSK)r
• Type: MCUr

Specifications of R0K5562T0S000BE

• Design Resources: RX62T CPU Board Schematics
• Contents: Board, Cable, CD, Documentation, Emulator, Power Supply
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: RX600 series

RSKRX62T
5. User Circuitry
5.1
A reset control circuit is fitted to the RSK to generate the required reset signal, and is triggered from the RES
switch. Refer to the RX62T hardware manual for details regarding the reset signal timing requirements, and the
RSKRX62T board schematics for information regarding the reset circuitry in use on the RSK.
5.2
A clock circuit is fitted to the RSK to generate the required clock signal to drive the MCU, and associated
peripherals. Refer to the RX62T hardware manual for details regarding the clock signal requirements, and the
RSKRX62T board schematics for information regarding the clock circuitry in use on the RSK. Details of the
oscillators fitted to the RSK are listed in Table 5-1 below.
5.3
There are four switches located on the RSK board. The function of each switch and its connection is shown in
Table 5-2. For further information regarding switch connectivity, refer to the RSKRX62T board schematics.
5.4
There are ten LEDs on the RSK board. The function of each LED, its colour, and its connections are shown in
Table 53.
REJ10J2194-0100
Oct 10, 2010
X1
X2
RES
SW1/BOOT
SW2
SW3/ADTRG
PWR
Boot
LED0
LED1
LED2
LED3
Switch
LED
Crystal
Reset Circuit
Clock Circuit
Switches
LEDs
Rev. 1.00
Green
Orange
Green
Orange
Red
Red
Colour
When pressed, the microcontroller is reset.
Connects to an IRQ input for user controls.
Connects to an IRQ input for user controls.
Connects to an IRQ input for user controls. The switch is also connected
to an ADTRG input, and is used to trigger AD conversions.
Main MCU oscillator.
Internal RSK Testing Only
Function
User operated LED.
User operated LED.
Indicates the status of the 5V power rail.
Indicates the status of the on-board programming selected
User operated LED.
User operated LED.
Table 5-2: Switch Connections
Table 5-3: LED Connections
Table 5-1: Oscillators
Function
Fitted
Unfitted
Default Placement
Function
12.5MHz
n/a
Frequency
RES#, Pin 10
PE5, Pin 01
PE4, Pin 08
PB4, Pin 30
No connection
P71, Pin 56
P72, Pin 55
No connection
P73, Pin 54
P33, Pin 58
HC49/4U
n/a
MCU Connection
MCU Connection
5. User Circuitry
Device Package
Page 15 of 40