U2353A AGILENT TECHNOLOGIES, U2353A Datasheet - Page 51

• Manufacturer Part Number: U2353A
• Description: USB Modular Data Acquisition
• Manufacturer: AGILENT TECHNOLOGIES

Specifications of U2353A

• No. Of Channels: 16
• Sampling Rate: 1MSPS
• Input Voltage Max: 12V
• Input Current Max: 2A
• Bandwidth: 400kHz
• External Height: 44mm
• External Width: 120mm
• External Depth: 182.4mm
• Sample Rate: 500 KSa/s
• Lead Free Status / RoHS Status: na

Performance characteristics
[1]
Vertical system: oscilloscope channels (continued)
Single-cursor accuracy
Dual-cursor accuracy
Horizontal
Range
Time base accuracy
Delay range
Modes
XY
Reference position
Trigger System
Sources
Modes
Holdoff time
Selections
• Edge
• Pulse width
• TV
Autoscale
Oscilloscope channel triggering
Range (internal)
Coupling
External (EXT) triggering
Input impedance
Maximum input
Range
EXT trigger pulse width
All specifi cations are warranted. specifi cations are valid after a 30-minute warm-up and within ±100 ºC of last calibration temperature.
[1]
(continued)
±{DC vertical gain accuracy + DC vertical offset accuracy + 0.2% full scale (~½ LSB)}
Example:
For 50 mV signal, scope set to 10 mV/div (80 mV full scale), 5 mV offset,
Accuracy = ±{4.0% (80 mV) + 0.1(10 mV) + 2.0 mV + 0.5% (5 mV) + 0.2% (80 mV)}
±{DC vertical gain accuracy + 0.4% full scale (~1 LSB)}
Example:
For 50 mV signal, scope set to 10 mV/div (80 mV full scale), 5 mV offset,
Accuracy = ±{4.0% (80 mV) + 0.4% (80 mV)}
1 ns/div to 50 s/div
20 ppm
Pre-trigger: –100 %
Post-trigger: +100 %
Main, roll, XY
Yes
Center
Ch 1, Ch 2, Ext (not applicable for TV trigger)
Normal, single, auto trigger
60 ns
Edge, pulse width, TV
Triggers on a rising or falling edge, alternating, or either edge of any source
Triggers on a pulse width greater than, equal to, or less than a specifi ed time limit, with
time limits ranging from 16 ns to 10 s.
• Minimum lower limit: 8 ns
• Minimum upper limit: 16 ns
• Maximum pulse width setting: 10 s
Triggers on one of three standard television waveforms: NTSC, PAL, SECAM
TV trigger sensitivity: 0.6 division of sync signal. Modes supported include Field 1, Field 2,
all fi elds, or any line within a fi eld.
Single-button automatic setup of all channels
±4 div from center screen
AC (< 15 Hz)
LF reject (~ 35 kHz)
HF reject (~ 35 kHz)
1 MW: ≈ 16 pF
CAT I 30 Vrms, 42 Vpk
DC coupling: trigger level ±1.25 V and ±2.5 V
> 2.5 ns
= ±6.385 mV
= ±3.52 mV
51