FLUKE-772 Fluke, FLUKE-772 Datasheet - Page 10
![MULTIMETER, DIGITAL, CLAMP](/photos/27/67/276721/4601796_sml.jpg)
FLUKE-772
Manufacturer Part Number
FLUKE-772
Description
MULTIMETER, DIGITAL, CLAMP
Manufacturer
Fluke
Specifications of FLUKE-772
Dmm Type
Clamp
Voltage Measuring Range Dc
0 To 30.00 V Dc
Current Measuring Range Dc
0mA To 100mA
Current Measuring Range Ac
0mA To 100mA
Dmm Functions
AC/DC Current
Current Ac Max
100mA
Ranging
Auto
Altitude
0 to 2000 m
Dimensions
1.63" × 3.0" × 9.75"
Humidity
<90% @ <30°C, <75% @ 30 to 55°C
Ip Rating
IP 40
Shock Resistance
1 m Drop Test (except jaw)
Temperature, Operating
-10 to 50 °C
Vibration
Random 2 g, 5 to 500 Hz
Lead Free Status / RoHS Status
na
Lead Free Status / RoHS Status
na
To use the test leads for measurements:
1.
2.
3.
4.
Current and Voltage Output Functions
Both Meters provide steady, stepped, and ramped current output for
testing 0-24 mA current loops. Additionally, the 773 provides voltage
output to 10 V. To access these functions, press
Sourcing mA
Use mA Source mode whenever it is necessary to source current into a
passive circuit such as a current loop with no loop supply. Source mode
depletes the battery faster than Simulate mode.
To enter Source mode for the 772, see Figure 4:
1.
2.
3.
Insert the test leads into the proper input jacks. See Figure 7.
Press the correct button for the measurement.
Apply the test leads.
Observe the reading on the main display. In mA mode, the
secondary display shows the reading in percentage of span.
Choose Source mode to supply current or voltage.
Choose Simulate mode to regulate current in an externally powered
current loop.
Choose Loop Supply mode to power an external device and
measure mA loop current.
Insert the test leads into the -mA and +mA jacks.
Press L.
Press
Figure 7. Taking Measurements with the Test Leads
T
until Source appears on the display.
LOOP PWR
mA SCALE
mA IN/OUT
HART
T
as necessary.
fjv09.eps