FLUKE-772 Fluke, FLUKE-772 Datasheet - Page 9

• Manufacturer Part Number: FLUKE-772
• Description: MULTIMETER, DIGITAL, CLAMP
• Manufacturer: Fluke

Specifications of FLUKE-772

• Dmm Type: Clamp
• Voltage Measuring Range Dc: 0 To 30.00 V Dc
• Current Measuring Range Dc: 0mA To 100mA
• Current Measuring Range Ac: 0mA To 100mA
• Dmm Functions: AC/DC Current
• Current Ac Max: 100mA
• Ranging: Auto
• Altitude: 0 to 2000 m
• Dimensions: 1.63" × 3.0" × 9.75"
• Humidity: <90% @ <30°C, <75% @ 30 to 55°C
• Ip Rating: IP 40
• Shock Resistance: 1 m Drop Test (except jaw)
• Temperature, Operating: -10 to 50 °C
• Vibration: Random 2 g, 5 to 500 Hz
• Lead Free Status / RoHS Status: na
• Lead Free Status / RoHS Status: na

Measurements can be taken with the clamp in the docked position,
remotely using the 1 m cable, or via test leads. For accurate
measurements:
To use the clamp for measurements:
1.
2.
To avoid electric shock, do not use the clamp on non-
insulated conductors.
Always zero the Meter prior to taking measurements with the clamp.
To reduce magnetic influences, zero the Meter as close to the
measurement in the same position or jaw direction that is used for
the measurements as possible.
Make sure the clamp is free of contamination.
Press C to enter Clamp Measure mode and to zero the Meter.
Clamp mode includes clamp measure, mA scale output, and mA
IN/OUT. If necessary, press N to change to mA scale.
Clamp the jaw around the conductor under test. The Meter displays
the measured conductor current. See Figure 6.
The small secondary display shows the reading in mA percentage of
span.
A positive reading indicates current flowing in the direction of
the arrow on the clamp.
A negative reading indicates current flowing in the opposite
direction of the arrow.
Do not clamp more than one wire.
Figure 6. Taking Measurements with the Clamp
XW Warning
OK
fjv03.eps