CE TMK212 BJ475KG-T Taiyo Yuden, CE TMK212 BJ475KG-T Datasheet - Page 61

• Manufacturer Part Number: CE TMK212 BJ475KG-T
• Description: Cap Ceramic 4.7uF 25VDC X7R 10% SMD 0805 T/R
• Manufacturer: Taiyo Yuden
• Type: Flatr

Specifications of CE TMK212 BJ475KG-T

• Package/case: 0805
• Mounting: Surface Mount
• Capacitance Value: 4.7 uF
• Dielectric: X7R
• Voltage: 25 Vdc
• Product Length: 2 mm
• Product Height: 1.25 mm
• Tolerance: 10 %

Precautions on the use of Multilayer Ceramic Capacitors
8.Storage conditions
△
！
PRECAUTIONS
当社カタログをご使用の際には 「当社製品に関するお断り」 を必ずお読みください。
Stages
・Recommended conditions
・Ceramic chip capacitors should be kept where no chlorine or
Storage
1. To maintain the solderability of terminal electrodes and to
2. The capacitance value of high dielectric constant capacitors
（type 2 &3） will gradually decrease with the passage of time,
keep the packaging material in good condition, care must
be taken to control temperature and humidity in the storage
area. Humidity should especially be kept as low as possible.
The ambient temperature must be kept below 40℃. Even
under ideal storage conditions capacitor electrode solder-
ability decreases as time passes, so should be used within
6 months from the time of delivery.
sulfur exists in the air.
so this should be taken into consideration in the circuit design.
If such a capacitance reduction occurs, a heat treatment of
150℃ for 1hour will return the capacitance to its initial level.
Ambient temperature
Humidity
Precautions
Below 30℃
Below 70% RH
1. If the parts are stored in a high temperature and humidity environment, problems
such as reduced solderability caused by oxidation of terminal electrodes and dete-
rioration of taping/packaging materials may take place. For this reason, components
should be used within 6 months from the time of delivery. If exceeding the above
period, please check solderability before using the capacitors.
△
！
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
Technical considerations
6/6
119
4