CE TMK325 F106ZH-T Taiyo Yuden, CE TMK325 F106ZH-T Datasheet - Page 47

• Manufacturer Part Number: CE TMK325 F106ZH-T
• Description: Cap Ceramic 10uF 25VDC Y5V -20% to 80% SMD 1210 T/R
• Manufacturer: Taiyo Yuden
• Type: Flatr

Specifications of CE TMK325 F106ZH-T

• Package/case: 1210
• Mounting: Surface Mount
• Capacitance Value: 10 uF
• Dielectric: Y5V
• Voltage: 25 Vdc
• Product Length: 3.2 mm
• Product Height: 1.5 mm
• Product Depth: 2.5 mm
• Tolerance: -20 to 80 %

【Test Methods and Remarks】
【Test Methods and Remarks】
■
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
mlcc_reli_e-01
16. Humidity Loading
Specified
17. High Temperature Loading
Specified
Note 1 The figures indicate typical specifications. Please refer to individual specifications in detail.
Note 2 Thermal treatment : Initial value shall be measured after test sample is heat-treated at 150＋0/－10℃ for an hour and kept at room temperature for 24±2hours.
Note 3 Voltage treatment : Initial value shall be measured after test sample is voltage-treated for an hour at both the temperature and voltage specified in the test conditions, and
Note 4 Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa
Class 1
Class 1
Preconditioning
Temperature
Humidity
Duration
Applied voltage
Charge/discharge current
Recovery
Preconditioning
Temperature
Duration
Applied voltage
Charge/discharge current
Recovery
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
Value
Value
RELIABILITY DATA
（Class 1）
（Class 1）
Temperature Compensating
High Permittivity （Class 2） Note 1
Temperature Compensating
High Permittivity （Class 2） Note 1
kept at room temperature for 24±2hours.
When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted under the following condi-
tion.
Temperature: 20±2℃,
Unless otherwise specified, all the tests are conducted under the "standard condition".
6 to 24 hrs （Standard condition） Note 5
6 to 24hr （Standard condition） Note 5
Standard
Standard
40±2℃
Standard
High Frequency Type
Standard
High Frequency Type
1000＋48/ー0 hrs
500＋24/ー0 hrs
Rated voltage×2
Rated voltage
90 to 95％RH
50mA max.
50mA max.
125±3℃
None
None
Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa
High Frequency Type
High Frequency Type
60±2℃
Appearance:
Capacitance change: Within ±3% or ±0.3pF, whichever is larger.
Q：
Insulation resistance: 1000 MΩ min.
Appearance:
Capacitance change: Within ±3% or ±0.3pF, whichever is larger.
Insulation resistance: 1000 MΩ min.
Appearance:
Capacitance change: Within ±12.5% （BJ, B7, C6, C7）
Dissipation factor：
Insulation resistance: 50 MΩ μF or 1000 MΩ, whichever is smaller.
Appearance:
Capacitance change: Within ±7.5% or ±0.75pF, whichever is larger.
Q：
Insulation resistance: 500 MΩ min.
Appearance:
Capacitance change: C≦2pF：Within ±0.4 pF
Insulation resistance: 500 MΩ min.
Appearance:
Capacitance change: Within ±12.5% （BJ, B7, C6, C7）
Dissipation factor：
Insulation resistance: 25 MΩ μF or 500 MΩ, whichever is smaller.
Class 2
Class 2
Preconditioning
Temperature
Humidity
Duration
Applied voltage
Charge/discharge current
Recovery
Preconditioning
Temperature
Duration
Applied voltage
Charge/discharge current
Recovery
No abnormality
C＜10pF：
10≦C＜30pF： Q≧275＋2.5C
C≧30pF：
No abnormality
No abnormality
Within ±30% （F）
5.0% max. （BJ, B7, C6, C7）
11.0% max. （F）
No abnormality
C＜30pF：Q≧100＋10C/3
C≧30pF：Q≧200
No abnormality
C＞2pF：Within ±0.75 pF
No abnormality
Within ±30% （F）
5.0% max. （BJ, B7, C6, C7）
11.0% max. （F）
Q≧200＋10C
Q≧350 （C：Nominal capacitance）
1 1
（Rated voltage are applied for 1 hour at 40℃） Note 3
applied for 1 hour at 85℃, 105℃ or 125℃） Note 3, 4
Voltage treatment （Twice the rated voltage shall be
85±2℃
（C：Nominal capacitance）
（C：Nominal capacitance）
BJ, F
24±2 hrs （Standard condition） Note 5
24±2 hrs （Standard condition） Note 5
Voltage treatment
Rated voltage×2 Note 4
500＋24/ー0 hrs
Rated voltage
90 to 95％RH
50mA max.
1000＋48/ー0 hrs
All items
40±2℃
50mA max.
105±3℃
C6
125±3℃
B7, C7
mlcc_reli-R4