G3NA220BDC524 Omron, G3NA220BDC524 Datasheet - Page 8

• Manufacturer Part Number: G3NA220BDC524
• Description: Relay SSR 7mA 32V DC-IN 20A 264V AC-OUT 4-Pin
• Manufacturer: Omron

Specifications of G3NA220BDC524

• Input Type: DC
• Output Device: Triac
• I/o Isolation Voltage: 2500 V
• Maximum Input Current: 7 mA
• Maximum Output Current: 20@Ta=40C A
• Maximum Input Voltage: 32 V
• Maximum Output Voltage: 264 V
• Output Type: AC
• Input Voltage (max): 32V
• Output Voltage (max): 264V
• Input Current (max): 7mA
• Output Current: 20A
• Isolation Voltage: 2.5kV
• Pin Count: 4
• Mounting: Screw
• Operating Temp Range: -30C to 80C
• Operating Temperature Classification: Commercial
• Rad Hardened: No
• Lead Free Status / RoHS Status: Compliant

■ Options (Order Separately)
One-touch Mounting Plate
The One-touch Mounting Plate is used to mount the GN3A to a DIN
Track.
R99-12 FOR G3NA (for the G3NA and G3NE)
Mounting Bracket
Heat Sinks
458
R99-11 (for the G3NA-240B, G3NA-440B)
Use Mounting Bracket R99-11 so that the G3NA-240B/-440B can be
mounted with the same pitch as that of the G3N-240B.
Y92B-N50 Heat Sink (for the G3NA-205B, G3NA-210B, G3NA-D210B, G3NA-410B, G3NE-210T(L))
For surface mounting, a 30% derating of the load current is required (from the Load Current vs. Ambient Temperature graphs).
The orientation indicated by the external dimensions is not the correct mounting orientation. When opening mounting holes, refer to the
mounting hole dimensions.
Solid State Relay
21
12.5
Two, M4 mounting
holes for the G3NE
35
30.5±0.3
16
4.6 dia.
8
4
G3NA
5
100 max.
77 max.
Two, M3 holes
90±0.3
30
44
47.6
Two, M4 mounting
holes for the G3NA
4.6
Two, M4 holes
5.6
44 max.
Two, 3.2-dia. holes
30
5
• When a Relay is mounted to DIN Track, use it within the rating for a
• Use the following DIN Tracks: PFP-100N or PFP-100N2.
To mount the Relay to DIN
Track, first mount it to the
One-touch Mounting Plate
and then attach it to the DIN
Track as shown in the
diagram.
To remove the Relay from
the DIN Track, pull down on
the tab with a screwdriver in
the direction of the arrow.
Relay without a heat sink.
51 max.
6
47 max.
4.5
56
Weight: approx. 200 g
Mounting Holes
35±0.2
Two, 4.4-dia.
or M4 holes
90±0.4