VMMK-3503-TR1G Avago Technologies US Inc., VMMK-3503-TR1G Datasheet - Page 11

• Manufacturer Part Number: VMMK-3503-TR1G
• Description: RF Amplifier Variable Gain Amp
• Manufacturer: Avago Technologies US Inc.
• Series: -r

Specifications of VMMK-3503-TR1G

• Current - Supply: 58mA
• Frequency: 500MHz ~ 18GHz
• Gain: 12dB
• Noise Figure: 3.5dB
• P1db: 8dBm
• Package / Case: 0402 (1005 Metric)
• Rf Type: 802.16 WiMAX
• Test Frequency: 6GHz
• Voltage - Supply: 3 V ~ 5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

S Parameter Measurements
The S parameters are measured on a 300 μm G-S-G
(ground signal ground) printed circuit board substrate.
Calibration is achieved with a series of through, short
and open substrates from which an accurate set of S pa-
rameters is created. The test board is 0.016 inch thickness
RO4350. Grounding of the device is achieved with a single
plated through hole directly under the device. The effect
of this plated through hole is included in the S parameter
measurements and is difficult to de-embed accurately.
Since the maximum recommended printed circuit board
thickness is nominally 0.020 inch, then the nominal effect
of printed circuit board grounding can be considered to
have already been included the published S parameters.
Package and Assembly Note
For detailed description of the device package, handling
and assembly, please refer to Application Note 5378.
Package Dimension Outline
Note:
All dimensions are in mm
Reel Orientation
11
I
F
TI
D
I T
E
A
Dimensions
Symbol
E
D
A
Min (mm)
0.500
1.004
0.225
ESD Precautions
Note: These devices are ESD sensitive. The following pre-
cautions are strongly recommended. Ensure that an ESD
approved carrier is used when die are transported from
one destination to another. Personal grounding is to be
worn at all times when handling these devices. For more
detail, refer to Avago Application Note A004R: Electro-
static Discharge Damage and Control.
Ordering Information
Device Orientation
Notes:
“L” = Device Code
“Y” = Month Code
Part Number
VMMK-3503-BLKG
VMMK-3503-TR1G
Max (mm)
USER FEED DIRECTION
0.585
1.085
0.275
TOP VIEW
4 mm
Devices Per
Container
100
5000
8 mm
END VIEW
Container
Antistatic Bag
7” Reel