ISP1301BS-S NXP Semiconductors, ISP1301BS-S Datasheet - Page 2

• Manufacturer Part Number: ISP1301BS-S
• Description: RF Transceiver USB OTG TRANSCEIVER
• Manufacturer: NXP Semiconductors

Specifications of ISP1301BS-S

• Number Of Receivers: 1
• Number Of Transmitters: 1
• Operating Supply Voltage: 1.65 V to 4.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Package / Case: HVQFN-24
• Maximum Data Rate: 12 Mbps
• Maximum Supply Current: 8 mA
• Minimum Operating Temperature: - 40 C
• Protocol Supported: USB 2.0
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: ISP1301BS,151

1. General description
2. Features
The ISP1301 is a Universal Serial Bus (USB) On-The-Go (OTG) transceiver device that is
fully compliant with Universal Serial Bus Specification Rev. 2.0 and On-The-Go
Supplement to the USB Specification Rev. 1.0a . The ISP1301 can transmit and receive
serial data at both full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) data rates.
It is ideal for use in portable electronics devices, such as mobile phones, digital still
cameras, digital video cameras, Personal Digital Assistants (PDAs) and digital audio
players. It allows USB Application Specific Integrated Circuits (ASICs), Programmable
Logic Devices (PLDs) and any system chip set (with the USB host or device function
built-in but without the USB physical layer) to interface to the physical layer of the USB.
The ISP1301 can interface to devices with digital I/O voltages in the range of
1.65 V to 3.6 V.
The ISP1301 is available in HVQFN24 package.
ISP1301
Universal Serial Bus On-The-Go transceiver
Rev. 03 — 21 February 2006
Fully complies with:
Can transmit and receive serial data at both full-speed (12 Mbit/s) and low-speed
(1.5 Mbit/s) data rates
Ideal for system ASICs or chip sets with built-in USB OTG dual-role core
Supports mini USB analog carkit interface
Supports various serial data interface protocols; transparent general-purpose buffer
mode allows you to control the direction of data transfer
Supports data line and V
Contains Host Negotiation Protocol (HNP) command and status registers
Supports serial I
2.7 V to 4.5 V power supply input range for the ISP1301
Built-in charge pump regulator outputs 5 V at current greater than 8 mA
Supports external charge pump
Supports wide range interfacing I/O voltage (V
control logics
Universal Serial Bus Specification Rev. 2.0
On-The-Go Supplement to the USB 2.0 Specification Rev. 1.0a
On-The-Go Transceiver Specification (CEA-2011) Rev. 1.0
2
C-bus interface for OTG status and command controls
BUS
pulsing session request
CC(I/O)
= 1.65 V to 3.6 V) for digital
Product data sheet