ISP1505CBS-T NXP Semiconductors, ISP1505CBS-T Datasheet - Page 20

• Manufacturer Part Number: ISP1505CBS-T
• Description: RF Transceiver USB2.0 ULPI HOST/DEV TRANSCVR
• Manufacturer: NXP Semiconductors

Specifications of ISP1505CBS-T

• Operating Supply Voltage: 1.65 V to 3.6 V
• Mounting Style: SMD/SMT
• Package / Case: HVQFN-24
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: ISP1505CBS,518

NXP Semiconductors
ISP1505A_ISP1505C_3
Product data sheet
If a crystal is attached or a clock is driven into the XTAL1 pin, the ISP1505 will drive a
60 MHz clock out from the CLOCK pin when DIR deasserts. This is shown as CLOCK in
Figure
The recommended power-up sequence for the link is as follows:
The ULPI interface is ready for use.
1. The link waits for 1 ms, ignoring all the ULPI pin status.
2. The link may start to detect DIR status level. If DIR is detected as LOW for three clock
cycles, the link may send a RESET command.
4.
Rev. 03 — 26 August 2008
ULPI HS USB host and peripheral transceiver
ISP1505A; ISP1505C
© NXP B.V. 2008. All rights reserved.
19 of 75