78M6612SP-EVM-1 Maxim Integrated Products, 78M6612SP-EVM-1 Datasheet - Page 21

• Manufacturer Part Number: 78M6612SP-EVM-1
• Description: Power Management Modules & Development Tools 78M6612 Eval Kit Phase EV Board
• Manufacturer: Maxim Integrated Products

Specifications of 78M6612SP-EVM-1

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

UM_6612_044
3.9.1 Update Command for MPU
The U command is used for updating default values of the MPU Data permanently in the flash. Before
issuing the U command, CE must first be turned off by the disable CE command. An example of a U
command is as follows:
>)U
Additional examples of MPU Data Access commands are provided in the following table:
Rev. 1.0
)
Description:
Usage:
Command
Combinations:
Examples:
MPU Data Access
Allows user to read from and write to MPU data space.
) {Starting MPU Data Address} {option}…{option}<CR>
)saddr? <CR>
)saddr?? <CR>
)saddr???<CR>
)saddr:eaddr?
)saddr$<CR>
)saddr$$ <CR>
)saddr$$$<CR>
)saddr:eaddr$
)saddr=n<CR>
)saddr=n=m<CR>
)saddr=+n<CR>
)saddr=+n=+m<CR>
)U<CR>
)08$<CR>
)08$$<CR>
)08$$$<CR>
)28:4D$
)08?<CR>
)08??<CR>
)08???<CR>
78M6612 Split Phase Evaluation Board User Manual
Read the register in decimal.
Read two consecutive registers in decimal.
Read three consecutive registers in decimal.
Block read command in decimal format. Read
consecutive registers starting with starting
address saddr and ending with address eaddr.
Results given in decimal.
Read the register word in hex.
Read two consecutive register words in hex.
Read three consecutive register words in hex.
Block read command in hex format. Read
consecutive registers starting with starting
address saddr and ending with address eaddr.
Results given in hex.
Write the value n to address saddr in hex format.
Write the values n and m to two consecutive
addresses starting at saddr in hex format.
Write the value n to address saddr in decimal
format.
Write the values n and m to two consecutive
addresses starting at saddr in decimal format.
Updates the default values of the MPU Data
permanently in the flash.
Reads data word at MPU address location 0x08
in hex format.
Reads data words at MPU address location
0x08, 0x09 in hex format.
Reads data words at MPU address location
0x08, 0x09, 0x0A in hex format.
Read data words in hex.
Reads data word at MPU address location 0x08
in decimal format.
Reads data words at MPU address location
0x08, 0x09 in decimal format.
Reads data words at MPU address location
0x08, 0x09, 0x0A in decimal format.
21