90548-2 TE Connectivity, 90548-2 Datasheet - Page 5

• Manufacturer Part Number: 90548-2
• Description: Connector Accessories Crimp Tool Die Set
• Manufacturer: TE Connectivity
• Type: Die Setr

Specifications of 90548-2

• Crimp Tool: Hand Crimper III
• Rohs Compliant: NA
• For Use With: SDE Dies
• Lead Free Status / Rohs Status: RoHS Exempt Product

9. VISUAL INSPECTION
The crimping dies should be inspected on a regular
basis to ensure that they have not become worn or
damaged. Inspect the crimp sections for flattened,
chipped, worn, or broken areas. If damage or
abnormal wear is evident, the tool must be replaced.
See Section 10, REPLACEMENT.
10. REPLACEMENT
Customer--replaceable parts are shown in Figure 1.
Available separately, PRO--CRIMPER III Hand
Crimping Tool Repair Kit 679221--1 includes a
replacement nut and a variety of pins, rings, screws,
and springs.
If the dies are damaged or worn excessively, they
must be replaced.
Rev D
Tyco Electronics Corporation
Order the repair kit and replaceable parts through
your Tyco Electronics representative, or call
1--800--526--5142, or send a facsimile of your
purchase order to 1--717--986--7605, or write to:
11.REVISION SUMMARY
Revisions to this instruction sheet include:
CUSTOMER SERVICE (38--35)
TYCO ELECTRONICS
PO BOX 3608
HARRISBURG PA 17105--3608
S
S
S
S
S
Changed PRO--CRIMPER II Hand Tool to
PRO--CRIMPER III Hand Tool;
Revised crimp--height comparator information;
Applied TE logo;
Updated format to current corporate
requirements; and
Added back page indicating tooling compatible
with dies 90548--2.
5 of 6